|
Item
|
Function
|
|
Car-navigation unit
|
• Reads the data (map, voice and other) from the DVD-ROM.
• Calculates and displays the vehicle's position from various signals.
• Calculates the route to the destination.
• Navigates the driver to the destination using the map screen and/or the voice.
-
Note
-
• DVD audio and video are not supported by this system.
-
• This unit does not support all Video CD and CD formats.
|
|
LCD unit
|
• Displays the screen (menus, maps and other screens) by remote control operation.
• Displays the status of audio, DIS and A/C by button operation on the information display.
|
|
GPS antenna
|
• Receives GPS signal from satellites.
|
|
Gyro sensor (inside of the car-navigation unit)
|
• Sends yaw-rate signal to the CPU in the car-navigation unit.
|
|
TR switch (ATX) or back-up light switch (MTX)
|
• Sends R-range or reverse signal to the car-navigation unit.
|
|
DSC unit (with DSC) or ABS/TCS HU/CM (with ABS/TCS)
|
• Sends vehicle speed signal to the car-navigation unit by CAN system.
|
|
Front speaker and tweeter (driver side)
|
• Outputs voice and audio sound.
|
|
DVD-ROM (inside of the car-navigation unit)
|
• Map information data of each country is recorded.
• Voice data used to guide the route is recorded.
• Route information data to search for the route is recorded.
|
|
Remote control
|
• Changes display screens, settings etc., by button operation.
|
|
Cradle
|
• Provides power source (B+, TNS) for remote control.
• Sends remote control signal to the car-navigation unit.
|