NO.2 CASSETTE TAPE PLAYER DOES NOT EJECT THE CASSETTE TAPE

Note

• The cassette tape player may not eject the cassette tape due to the tape slack, peel-off or seal on it.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Click the eject button on the player. • Is "TAPE OUT" message displayed?	Yes	Go to the next step.
		No	Replace the cassette patch.
2	• Visually inspect the dust cover on the cassette patch. • Is there any damage on the cover?	Yes	Replace the cassette patch.
		No	Go to the next step.
3	• Inspect the cassette patch installation. • Is the cassette patch installed securely? Note • Inspect the connector for poor connection (such as damaged/bent/pulled-out pins, corrosion).	Yes	Replace the cassette tape player. Note When replacing the cassette tape player, inspect the followings: • No peeling-off the label. • Cassette patch is normal.
		No	Install the cassette patch securely. If the cassette patch is broken, replace the cassette patch.