PULSATION DAMPER INSPECTION [LF, L3]

id0114008028a4

1. Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE [LF, L3].)

2. Remove the pulsation damper. (See PULSATION DAMPER REMOVAL/INSTALLATION [LF, L3].)

3. Visually inspect the pulsation damper for damage and cracks. Also verify that there is no extreme rust which will cause fuel leakage.

• If either is observed, replace the pulsation damper.

4. Complete the "AFTER REPAIR PROCEDURE". (See AFTER REPAIR PROCEDURE [LF, L3].)