SUSPENSION SPECIFICATIONS


id020000100300

Item

Specification

4SD, 5HB

WGN

Front suspension
Type
High-mount double wishbone
(with double-pivoted lower arm(s))
Spring type
Coil spring
Shock absorber type
Cylindrical, double-acting
(Low-pressure gas charged with rebound spring)
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
23 {0.91}
Wheel alignment
(Unloaded)*1
Total toe-in
(mm {in})
Tire: 2±4 {0.08±0.16}, Rim inner: 1.4±2.8 {0.06±0.12}
(degree)
0°11'±0°22'
Maximum steering angle
inner
39°±3°
outer
31°±3°
Caster angle*2
(reference value)
normal
3°47'±1°
3°40'±1°
elevated*3
3°42'±1°
3°35'±1°
Camber angle*2
(reference value)
normal
-0°17'±1°
-0°15'±1°
elevated*3
-0°10'±1°
-0°08'±1°
Steering axis inclination
(reference value)
normal
5°28'
5°24'
elevated*3
5°18'
5°16'
Rear suspension
Type
E-type multi-link
Spring type
Coil spring
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
4SD: 18 {0.71} or 19 {0.75}
5HB: 18 {0.71}
18 {0.71}
Shock absorber type
Cylindrical, double-acting (Low-pressure gas charged)
Wheel alignment
(Unloaded)*1
Total toe-in
(mm {in})
Tire: 2±4 {0.08±0.16}, Rim inner: 1.4±2.8 {0.06±0.12}
(degree)
0°11'±0°22'
Camber angle*2
normal
-1°13'±1°
-1°06'±1°
elevated*3
-1°05'±1°
-0°58'±1°
Thrust angle
(degree)
0°±0°48'

*1 :
Engine coolant and engine oil are at specified level. Fuel is full. Spare tire, jack and tools are in designated position.
*2 :
Difference between left and right must not exceed 1°30' .
*3 :
Distance between wheel center and fender brim is following. 4SD and 5HB front: 402 mm {15.82 in} (reference value) 4SD and 5HB rear: 401 mm {15.78 in} (reference value), WGN front: 405 mm {15.94 in} (reference value) WGN rear: 407 mm {16.02 in} (reference value)