BRAKE SPECIFICATIONS


id040000100300

Item

Specification

Brake pedal
Type
Suspended
Pedal lever ratio
2.7
Max. stroke
(mm {in})
128.5 {5.06}
Master cylinder
Type
Tandem (with level sensor)
Cylinder diameter
(mm {in})
20.64 {0.813}
Front brake (disc)
Type
Ventilated disc
Cylinder bore
(mm {in})
57.15 {2.250}
Pad dimensions (area × thickness)
4SD, 5HB, WGN (except Australian specs.): 4,010 {6.42} × 12.5 {0.49}
WGN (Australian specs.): 4,220 {6.75} × 10.0 {0.39}
(mm2 {in2} × mm {in})
Disc plate dimensions
(outer diameter × thickness)
4SD, 5HB, WGN (except Australian specs.): 274 {10.8} × 24.0 {0.945}
WGN (Australian specs.): 283 {11.1} × 25.0 {0.984}
(mm {in})
Rear brake (disc)
Type
Solid disc
Cylinder bore
(mm {in})
34.93 {1.375}
Pad dimensions (area × thickness)
2,810 {4.51} × 8.0 {0.31}
(mm2 {in2} × mm {in})
Disc plate dimensions
(outer diameter × thickness)
280 {11.0} × 10.0 {0.39}
(mm {in})
Power brake unit
Type
Vacuum multiplier, single diaphragm
Diameter
(mm {in})
279 {10.9}
Braking force control device
Type
With ABS: EBD (Electronic Brakeforce Distribution)
Without ABS: Dual proportioning valve
Parking brake
Type
Mechanical two-rear-wheel control
Operation system
Center lever type
Brake fluid
Type
SAE J1703, FMVSS116 DOT3