NO.5 DSC*2 OPERATES FREQUENTLY/DSC DOES NOT WORK CORRECTLY*2 : DSC INDICATOR LIGHT GOES ON AND OFF WHILE DSC OPERATES


5	*DSC (2) operates frequently. /DSC does not work correctly. (2): DSC indicator light goes on and off while DSC operates.*
[TROUBLESHOOTING HINTS] • DSC unit detected malfunction (input and output device malfunction) • Poor installation with yaw rate sensor, lateral-G sensor and/or steering angle sensor (If any of the above sensors are poorly installed, DSC may operate intermittently) • When replacing DSC unit, yaw rate sensor, lateral-G sensor or steering angle sensor, initialization is not performed. (If initialization is not performed correctly, DSC may not work correctly)


STEP	INSPECTION		ACTION
1	CHECK DSC UNIT FOR DTCs • Check the DTC for the DSC ON-BOARD DIAGNOSTIC SYSTEM. • Have DTCs been recorded in memory?	Yes	Perform inspection using appropriate DTC.
1		No	Go to next step.
2	VERIFY THAT EACH SENSOR IS INSTALLED • Are yaw rate sensor, lateral-G sensor and steering angle sensor securely installed?	Yes	Go to next step.
2		No	Install malfunctioning sensor securely.
*3	VERIFY THAT EACH SENSOR IS INITIALIZED • Did each sensor initialize after replacement of DTC unit, yaw rate sensor, lateral-G sensor or steering angle sensor?	Yes	Find malfunctioning part according to "INTERMITTENT CONCERN TROUBLESHOOTING."
*3		No	Perform initialization.