|
Item
|
Specification
|
|
Brake fluid type
|
SAE J1703, FMVSS 116 DOT3
|
|
Brake pedal height (reference value)
|
L.H.D.: 187 mm {7.36 in}
R.H.D.: 172 mm {6.77 in}
|
|
Brake pedal play
|
0-3 mm {0-0.1 in}
|
|
Brake pedal-to-floor clearance
|
68 mm {2.7 in} min. (Brake pedal when depressed at 588 N {60 kgf, 132 lbf})
|
|
Power brake unit fluid pressure when pedal depressed at 200 N {20 kgf, 44 lbf}
|
At 0 kPa {0 mmHg, 0 inHg}: 590 kPa {6.02 kgf/cm2, 85.6 psi}
|
|
Power brake unit fluid pressure when pedal depressed at 200 N {20 kgf, 44 lbf}
|
At 66.7 kPa {500 mmHg, 19.7 inHg}: 8,780 kPa {89.53 kgf/cm2, 1,273 psi}
|
|
Proportioning valve fluid pressure (without ABS)
|
Rear brake fluid pressure when front brake fluid pressure at 2,450 kPa {25 kgf/cm2, 355 psi}: 2,450 kPa {25 kgf/cm2, 355 psi} ± 200 kPa {2 kgf/cm2, 29 psi}
Rear brake fluid pressure when front brake fluid pressure at 5,880 kPa {60 kgf/cm2, 853 psi}: 3,480 kPa {35.5 kgf/cm2, 505 psi} ± 300 kPa {3 kgf/cm2, 44 psi}
|
|
Front disc plate runout limit
|
0.05 mm {0.002 in}
|
|
Minimum front disc plate thickness
|
4SD and 5HB: 22 mm {0.87 in}
WGN (except Australian specs.): 22 mm {0.87 in}
WGN (Australian specs.): 23 mm {0.91 in}
|
|
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
|
4SD and 5HB: 22.8 mm {0.90 in}
WGN (except Australian specs.): 22.8 mm {0.90 in}
WGN (Australian specs.): 23.8 mm {0.94 in}
|
|
Minimum front disc pad thickness
|
2.0 mm {0.079 in} min.
|
|
Rear disc plate runout limit
|
0.05 mm {0.002 in}
|
|
Minimum rear disc plate thickness
|
8 mm {0.31 in}
|
|
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle
|
8.8 mm {0.35 in}
|
|
Minimum rear disc pad thickness
|
2.0 mm {0.079 in} min.
|
|
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}
|
3-6 notches
|