NO.24 ENGINE STALLS WHEN SHIFTED TO D RANGE, OR IN R POSITION (GENERAL (L.H.D.) SPECS. SPORT AT) [FN4A-EL]


24	Engine stalls when shifted to D range, or in R position
DESCRIPTION	• Engine stalls when shifting from N or P position to D range or R position at idle.
POSSIBLE CAUSE	• The malfunction is on the engine control side (i.e. Electronic throttle control system). Otherwise, the malfunction is in the input/turbine speed sensor (engine sometimes starts) or TCC circuit (engine always stalls).


STEP	INSPECTION		ACTION
1	• Go to symptom troubleshooting No.10 "LOW IDLE/STALLS DURING DECELERATION". (See NO.10 LOW IDLE/STALLS DURING DECELERATION [LF, L3].) • Is engine control system okay?	Yes	Repeat basic inspection and repair or replace any defective parts according to inspection result. (See BASIC INSPECTION (GENERAL (L.H.D.) SPECS. SPORT AT) [FN4A-EL].)
1		No	Repair or replace any defective parts according to inspection results.
2	• Verify test results. - If okay, return to diagnostic index to service any additional symptoms. - If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis. • If vehicle repaired, troubleshooting completed. • If vehicle not repaired or additional diagnostic information not available, replace TCM.