NO.27 HOLD INDICATOR LIGHT DOES NOT ILLUMINATE WHEN HOLD SWITCH IS TURNED TO ON (4AT) (EXCEPT FOR GENERAL (L.H.D.) SPECS. SPORT AT) [FN4A-EL]

id0503a18154a8

27

HOLD indicator light does not illuminate when HOLD switch is turned to ON (4AT)

DESCRIPTION

• HOLD indicator light in dashboard does not illuminate when HOLD switch is turned on and IG SW at ON.

POSSIBLE CAUSE

• HOLD switch, HOLD indicator light or related wiring harness malfunction.

Diagnostic procedure

STEP

INSPECTION

ACTION

1
• Are other indicator lights illuminated with ignition switch ON?
Yes
Go to next step.
No
Inspect meter fuse.
2
• Inspect TCS PID value using WDS or equivalent.
• Is TCS PID value okay?
Yes
Inspect instrument cluster.
No
Inspect HOLD switch is okay, inspect for continuity between HOLD switch and PCM terminal 3Q.
3
• Verify test results.
- If okay, return to diagnostic index to service any additional symptoms.
- If malfunction remains, inspect related Service informations and perform repair or diagnosis.
- If vehicle not repaired, trouble shooting completed.
- If vehicle not repaired or additional diagnostic information not available, replace PCM.