|
STEP
|
INSPECTION
|
ACTION
|
|
1
|
• Is water temperature sensor normal?
|
Yes
|
Go to next step.
|
|
No
|
Replace water temperature sensor.
|
|
2
|
• Disconnect climate control unit connector (24-pin) and water temperature sensor connector.
• Is there open circuit between following terminals of climate control unit connector (24-pin) and water temperature sensor connector?
-
- 1O-A
-
- 1I-B
|
Yes
|
Repair wiring harness.
|
|
No
|
Go to next step.
|
|
3
|
• Is there short circuit to ground between terminal 1O of climate control unit connector (24-pin) and terminal A of water temperature sensor connector?
|
Yes
|
Repair wiring harness.
|
|
No
|
Connect climate control unit connector and go to next step.
|
|
4
|
• Turn the ignition switch to ON position.
• Is voltage at terminal 1O of climate control unit connector (24-pin) above 5 V?
|
Yes
|
This system is normal at present. (Erase the past failure from memory.)
|
|
No
|
Replace climate control unit.
|