|
PID name (definition)
|
Unit/condition
|
Condition/specification
|
SAS unit terminal
|
|
CONT_RCM
(Number of continuous DTC)
|
-
|
• DTC is detected: 1-255
• DTC is not detected: 0
|
-
|
|
D_ABAGR2
(Driver-side air bag module (inflator No.2) resistance)
|
ohm
|
Under any condition: 1.5-3.7 ohm
|
1G, 1J
|
|
D_CRSH_S
(Driver-side side air bag sensor state)
|
OK/
COMM FAIL/
INT FAIL
|
• Sensor normal: OK
• Sensor communication error: COMM FAIL
• Sensor internal circuit abnormal: INT FAIL
|
2Z, 2AA
|
|
DABAGR
(Driver-side air bag module (inflator No.1) resistance)
|
ohm
|
Under any condition: 1.5-3.7 ohm
|
1S, 1V
|
|
DR_CURTN
(Driver-side curtain air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2V, 2Y
|
|
DR_PTENS
(Driver-side pre-tensioner seat belt resistance)
|
ohm
|
Under any condition: 1.5-3.1 ohm
|
2P, 2S
|
|
DS_AB
(Driver-side side air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2M, 2O
|
|
DS_AB_ST
(Driver-side side air bag module circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2M, 2O
|
|
DS_CURT_ST
(Driver-side curtain air bag module circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2V, 2Y
|
|
DS1_STAT
(Driver-side air bag module (inflator No.1) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1S, 1V
|
|
DS2_STAT
(Driver-side air bag module (inflator No.2) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1G, 1J
|
|
DSB_P_ST
(On demand driver-side pre-tensioner seat belt circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2P, 2S
|
|
DSSBLT_PF
(Driver-side pre-tensioner seat belt circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2P, 2S
|
|
FRNT_CRSH_SNSR
(Crash zone sensor state)
|
OK/
COMM FAIL/
INT FAIL
|
• Sensor normal: OK
• Sensor communication error: COMM FAIL
• Sensor internal circuit abnormal: INT FAIL
|
1B, 1C
|
|
OD_D_CRSH
(On demand driver-side side air bag sensor state)
|
OK/
COMM FAIL/
INT FAIL
|
• Sensor normal: OK
• Sensor communication error: COMM FAIL
• Sensor internal circuit abnormal: INT FAIL
|
2Z, 2AA
|
|
OD_D_CURT
(On demand driver-side curtain air bag module circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2V, 2Y
|
|
OD_DAB1_ST
(On demand driver-side air bag module (inflator No.1) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1S, 1V
|
|
OD_DAB2_ST
(On demand driver-side air bag module (inflator No.2) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1G, 1J
|
|
OD_DSAB_ST
(On demand driver-side side air bag circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2M, 2O
|
|
OD_F_CRSH
(On demand crash zone sensor state)
|
OK/
COMM FAIL/
INT FAIL
|
• Sensor normal: OK
• Sensor communication error: COMM FAIL
• Sensor internal circuit abnormal: INT FAIL
|
1B, 1C
|
|
OD_P_CRSH
(On demand passenger-side side air bag sensor state)
|
OK/
COMM FAIL/
INT FAIL
|
• Sensor normal: OK
• Sensor communication error: COMM FAIL
• Sensor internal circuit abnormal: INT FAIL
|
2B, 2C
|
|
OD_P_CURT
(On demand passenger-side curtain air bag module circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2A, 2D
|
|
OD_PAB1ST
(On demand passenger-side air bag module (inflator No.1) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1M, 1P
|
|
OD_PAB2_ST
(On demand passenger-side air bag module (inflator No.2) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1A,1D
|
|
OD_P_PSAB_ST
(On demand passenger-side side air bag sensor circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2I, 2L
|
|
P_ABAGR2
(Passenger-side air bag module (inflator No.2) resistance)
|
ohm
|
Under any condition: 1.4-2.9 ohm
|
1A, 1D
|
|
P_PTENSFLT
(Passenger-side pre-tensioner seat belt circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2G, 2J
|
|
PABAGR
(Passenger-side air bag module (inflator No.1) resistance)
|
ohm
|
Under any condition: 1.4-2.9 ohm
|
1M, 1P
|
|
PCRSH_SNSR
(Passenger-side side air bag sensor state)
|
OK/
COMM FAIL/
INT FAIL
|
• Sensor normal: OK
• Sensor communication error: COMM FAIL
• Sensor internal circuit abnormal: INT FAIL
|
2B, 2C
|
|
PS_AB
(Passenger-side side air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2I, 2L
|
|
PS_AB_ST
(Passenger-side side air bag sensor circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2I, 2L
|
|
PS_CURTN
(Passenger-side curtain air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2A, 2B
|
|
PS_CURT_ST
(Passenger-side curtain air bag module circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2A, 2D
|
|
PS_PTENS
(Passenger-side pre-tensioner seat belt resistance)
|
ohm
|
Under any condition: 1.5-3.1 ohm
|
2G, 2J
|
|
PS1_STAT
(Passenger-side air bag module (inflator No.1) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1M, 1P
|
|
PS2_STAT
(Passenger-side air bag module (inflator No.2) circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
1A, 1D
|
|
PSB_P_ST
(On demand passenger-side pre-tensioner seat belt circuit state)
|
NORMAL/
OPEN/
SHRT GND/
SHRT B+
|
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
|
2G, 2J
|
|
RCM_VOLT
(System IG1 voltage value)
|
V
|
• Ignition switch to ON position: B+
• Other: 0 V
|
1W
|