DTC 03:ER02


id0902f6817300

DTC 03:Er02

CD player

DETECTION CONDITION

Note
• When error occurs, error message "CHECK CD" is displayed in the LCD.
• Cannot play CD normally or change tracks.

POSSIBLE CAUSE

• Defective CD (scratches or dirt)
• CD player malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION

1
VERIFY WHETHER MALFUNCTION IS IN CD PLAYER OR CD
• Play CD and select other song (change tracks).
• Does CD player change tracks?
Yes
Go to Step 3.
No
Not able to change particular tracks.
Go to next step.
Not able to change any tracks.
Change CD and perform track-change again.
• If CD player changes tracks, then go to Step 3.
• If not, replace CD player.
2
INSPECT CD
• Inspect condition of CD where error has occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to next step.
3
INSPECT CD PLAYER
• Clear DTC.
• Play CD and select other song (change tracks).
• Start on-board diagnostic test mode.
• Is DTC 03:Er02 displayed?
Yes
Replace CD player.
No
Troubleshooting completed.