DTC 06:ER02

id0902f6817700

DTC 06:Er02

CD changer (upper module)

DETECTION CONDITION

Note
• When error occurs, error message "CHECK CD" is displayed in the LCD.
• Cannot play CD normally or change tracks.

POSSIBLE CAUSE

• Defective CD (scratches or dirt)
• CD changer (upper module) malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION

1
VERIFY WHETHER MALFUNCTION IS IN CD CHANGER (UPPER MODULE) OR CD
• Play all CDs in changer and select various tracks.
• Is CD changer able to change tracks?
Yes
Go to Step 3.
No
Not able to change particular tracks.
Go to next step.
Not able to change any tracks.
Change CD and perform track-change again.
• If CD changer changes tracks, go to Step 3.
• If not, replace CD changer (upper module).
2
INSPECT CD
• Inspect condition of CD where error has occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to next step.
3
INSPECT CD CHANGER (UPPER MODULE)
• Clear DTC.
• Play CD and select other song (change tracks).
• Start on-board diagnostic test mode.
• Is DTC 06:Er02 displayed?
Yes
Replace CD changer (upper module).
No
Troubleshooting completed.