DTC 07:ER01


DTC 07:Er01	MD player
DETECTION CONDITION	• MD player cannot implement insert and eject commands.
POSSIBLE CAUSE	• Defective MD (broken or foreign material stuck/attached) • MD player malfunction


STEP	INSPECTION		ACTION
1	• Is MD able to be ejected?	Yes	Go to next step.
1	• Is MD able to be ejected?	No	Replace MD player.
2	INSPECT MD • Inspect condition of MD where error has occurred. • Is MD okay?	Yes	Go to next step.
2		No	Repair (remove foreign material) or replace MD, then go to next step.
3	INSPECT MD PLAYER • Clear DTC. • Insert and eject MD with no defect. • Start on-board diagnostic test mode. • Is DTC 07:Er01 displayed?	Yes	Replace MD player.
3		No	Troubleshooting completed.