DTC 07:ER02

id0902f6818100

DTC 07:Er02

MD player

DETECTION CONDITION

Note
• When error occurs, error message "CHECK MD" is displayed in the LCD.
• Cannot play MD normally or change tracks.

POSSIBLE CAUSE

• Defective MD (scratches or dirt)
• MD player malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION

1
VERIFY WHETHER MALFUNCTION IS IN MD PLAYER OR MD
• Play MD and select other song (change tracks).
• Is MD player able to change tracks?
Yes
Go to Step 3.
No
Not able to change particular tracks.
Go to next step.
Not able to change any tracks.
Change MD and perform track-change again.
• If MD player changes tracks, then go to Step 3.
• If not, replace MD player.
2
INSPECT MD
• Inspect condition of MD where error has occurred.
• Is MD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace MD, then go to next step.
3
INSPECT MD PLAYER
• Clear DTC.
• Play MD and select other song (change tracks).
• Start on-board diagnostic test mode.
• Is DTC 07:Er02 displayed?
Yes
Replace MD player.
No
Troubleshooting completed.