ACTIVE COMMAND MODE TABLE
id0902i7466000
LHID
Command name
Definition
CALAXLSN#
Command for headlight zeroset use (See
HEADLIGHT ZEROSET
)
Note
• Select the following four commands at the same time and carry out simulation inspection.
Command name
Definition
Operation
Note
HDL_POS#
Select "Calibration" operation, verify that the headlight actuator moves to the position at time of headlight zeroset
Calibration/High/Low/Auto
Ignition key at ON (Engine OFF), and headlight ON
Select "High" operation, verify that headlight actuator moves upward
Select "Low" operation, verify that headlight actuator moves downward
Select "Auto" operation, verify that headlight actuator is under automatic control