MAGNETIC CLUTCH ADJUSTMENT [FULL-AUTO AIR CONDITIONER]

id0740a1800500

Warning

•  If A/C compressor operation is performed, do not start the engine. Otherwise, the drive belt could get caught and cause an accident.

1.  Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)

2.  Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

am6zzw00010672

3.  Verify the clearance.

•  If the clearance is not within the specification, adjust the clearance by changing the type or number of the shim kit. (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY [FULL-AUTO AIR CONDITIONER].)

am6zzw00010673

Magnetic clutch clearance

0.35—0.65 mm {0.014—0.025 in}