REAR SEAT CENTER ARMREST TRIM REMOVAL/INSTALLATION

id091300814000

Without Rear Seat Warmer System

1.  Remove the rear seat center armrest. (See REAR SEAT CENTER ARMREST REMOVAL/INSTALLATION.)

2.  Insert a remover tool into the gap between the cup holder and the rear seat center armrest in the direction of the arrow shown in the figure, and disengage the tabs.

am6zzw00014120

3.  Insert the remover tool into the gap between the cup holder and the rear seat center armrest in the direction of the arrow shown in the figure, and disengage the tabs.

am6zzw00014121

4.  Remove the cup holder in the direction of the arrow shown in the figure.

am6zzw00012391

5.  Slide hook A in the order of arrows (1), (2), (3) shown in the figure to detach it from hook B.

am6zzw00012482

6.  Remove the rear seat center armrest trim.

7.  Install in the reverse order of removal.

With Rear Seat Warmer System

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the rear seat center armrest. (See REAR SEAT CENTER ARMREST REMOVAL/INSTALLATION.)

3.  Remove the cup holder. (See REAR SEAT WARMER SWITCH REMOVAL/INSTALLATION.)

4.  Slide hook A in the order of arrows (1), (2), (3) shown in the figure to detach it from hook B.

am6zzw00012482

5.  Remove the rear seat center armrest trim.

6.  Install in the reverse order of removal.