REAR SEAT CUSHION LOCK REMOVAL/INSTALLATION

id091300999700

1.  Disconnect the negative battery cable. (with rear seat warmer system) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

3.  Move the flathead screwdriver wrapped in protective tape in the direction of the arrow (1) shown in the figure and disengage tab.

am6zzw00011382

4.  Remove the rear seat cushion lock in the direction of the arrow (2) shown in the figure.

5.  Install in the reverse order of removal.