LOW AND REVERSE BRAKE INSPECTION

id051700662700

Drive Plate Inspection

1. Measure the thickness of the drive plate in four locations (each separated by 90°) and calculate the average value.

Caution

• When measuring the thickness of the drive plate, measure the thickness including the facing.

• Measure the thickness of all the drive plates.

Note

• Drive plate size: Outer diameter approx. 174.1 mm {6.854 in}

• Recommended measuring instrument: Micrometer

azzjjw00001316

Minimum:

1.475 mm {0.05808 in}

• If it is less than the minimum specification, replace the drive plate with a new one.