ENGINE OIL DATA RESET [SKYACTIV-G 2.0, SKYACTIV-G 2.5]

id0140g2444700


European Specs.

Note
•  If the engine oil was replaced with the engine oil maintenance monitor function ON, perform the engine oil data reset to reset the engine oil replacement period calculation data recorded in the PCM regardless of whether or not the wrench mark is illuminated.
•  The ON/OFF condition of the engine oil maintenance function can be verified using the M-MDS.
•  If the PCM determines that the engine oil replacement period has come, it stores the DTC P253F:00.

Engine oil data reset procedure

Step

Inspection

Results

Action

Note
1
•  Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition.
•  Is the engine oil maintenance monitor function on?
Yes
Go to the next step.
If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.
No
The engine oil data reset is unnecessary.
2
•  Switch the ignition ON (engine off or on) and perform the following procedure within 10 s.
―  Press the down switch of the steering switch for 5 s or more.
•  Does the master warning light flash for 3 s?
Yes
Go to the next step.
The master warning light flashes for 3 s when the engine oil data reset procedure is completed.
No
Perform Step 2 again.
3
•  Retrieve the PCM DTC using the M-MDS.
•  Is the DTC P0253F:00 displayed?
Yes
Clear the DTC from the PCM memory using the M-MDS.
(See AFTER REPAIR PROCEDURE [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)
Engine oil data reset is completed.
DTC P0253F:00 cannot be deleted even if engine oil data reset is completed, therefore, clear the DTC using M-MDS memory clearing procedure.
No
Engine oil data reset is completed.