DPF [SKYACTIV-D 2.2]
id0180q1001400
Purpose of Adoption
• To remove particle matter (PM) in the exhaust gas, the DPF collects and burns PM.
Service Point
• When the DPF indicator light is illuminated, compulsory DPF regeneration is required. In addition, after replacing the DPF, DPF data reset and fuel injection amount learning are required.
• Two methods are available for compulsory DPF regeneration and data reset. One is to use the M-MDS, and the other is to short the check connector terminal.
-
<Compulsory DPF regeneration procedure>
1. Switch the ignition ON.
2. Start the engine and let it warm up.
3. Ground the test terminal.
4. Perform engine racing twice within 5 seconds by fully closing/opening the accelerator pedal.
5. Verify that the engine speed increases.(When the regeneration is completed, the engine speed decreases.)
Common Inquiry
• If the DPF indicator light is illuminated, advice the user on driving in accordance with the instructions in the owner's manual.
Other
