 |
am6zzw00010806
STEERING SHIFT SWITCH INSPECTION [FW6A-EL]
id0517h1600700
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)
2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION .)
3. Disconnect the steering shift switch wiring harness connector.
am6zzw00010806
|
4. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION.)
5. Using a precision flathead screwdriver, release the tab.
am6zzw00009715
|
6. Measure the continuity between steering shift switch wiring harness connector terminals A—B and terminals D—E.
Up switch
adejjw00004072
|
Down switch
am6zzw00009039
|
|
Switch |
Terminal |
Test condition |
Continuity |
|---|---|---|---|
|
Up switch
|
A—B
|
Up switch is operated (up switch is pulled outward)
|
Continuity
|
|
Up switch is not operated (up switch is not pulled outward)
|
No continuity
|
||
|
Down switch
|
D—E
|
Down switch is operated (down switch is pulled outward)
|
Continuity
|
|
Down switch is not operated (down switch is not pulled outward)
|
No continuity
|
