SELECTOR LEVER INSPECTION

id051800297000

Note

There are two types of automatic transaxle shift mechanisms.

•  Type A: Gate-shaped key type. There is no lock release button on the selector lever knob.

•  Type B: Gate-shaped straight type. There is a lock release button on the selector lever knob.

1.  Switch the ignition ON (engine off or on).

2.  Perform the following procedures to inspect the selector lever.

•  If there is any malfunction, adjust the selector cable. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(1)  Verify that the selector lever can be operated as shown in the figure.

L.H.D. (type A)

ac5wzw00003057

L.H.D. (type B)

am6zzw00012673

R.H.D.

ac5wzw00000794

(2)  Verify that the selector lever can be operated smoothly and moderately.