SLIDE MOTOR INSPECTION

id091300800900

Warning

• Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual before handling the front seat (side air bag integrated). (See AIR BAG SYSTEM SERVICE WARNINGS.) (See AIR BAG SYSTEM SERVICE CAUTIONS.)

Caution

• When performing the procedure with a front seat removed from the vehicle, perform the procedure on a clean cloth so as not to damage or soil the seat.

Note

• When removing the front seat from the vehicle or putting it back in, it can be performed easier by removing the headrest.

1. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2. Disconnect the slide motor connector.

3. Apply battery positive voltage to the slide motor terminals and inspect the front seat operation.

am6zzw00017993

Front seat operation

Connection

B

D

Forward

GND

B+

Backward

B+

GND

Front seat operation	Connection
Forward	GND	B+
Backward	B+	GND

• If not as specified, replace the front seat cushion frame/adjuster unit. (See FRONT SEAT CUSHION FRAME/ADJUSTER UNIT REMOVAL/INSTALLATION.)

2. Disconnect the slide motor connector.

3. Apply battery positive voltage to the slide motor terminals and inspect the front seat operation.

am6zzw00017994

Front seat operation

Connection

B

D

Forward

B+

GND

Backward

GND

B+

Front seat operation	Connection
Forward	B+	GND
Backward	GND	B+

• If not as specified, replace the front seat cushion frame/adjuster unit. (See FRONT SEAT CUSHION FRAME/ADJUSTER UNIT REMOVAL/INSTALLATION.)