SECURITY AND LOCKS PERSONALIZATION

id091400111100

•  A personalization features that switches the activation/deactivation of each function has been adopted.
•  The setting of the following system functions, and warning and guidance functions can be turned ON/OFF optionally.
•  Refer to the Workshop Manual for the detailed setting procedure.

Advanced Keyless Entry System


Using Mazda Modular Diagnostic System (M-MDS)

M-MDS display

Function

Initial setting

Setting content

Control unit
Advanced keyless function.*1
The advanced keyless entry system and push button start system functions can be disabled.
Enabled
Enabled. / Disabled.
Start stop unit
Walk Away Lock.
The out-of-area (reception area) type auto lock function can be set.
OFF
Not Adopted. / OFF / ON
Start stop unit
Auto Re-lock Time.
The operation start time of the auto re-lock function can be changed.
30 seconds
Not Adopted. / 30 seconds / 60 seconds / 90 seconds
Start stop unit
Lock Beep Volume.*2
The keyless beeper volume can be adjusted.
Medium / Off*3
Not Adopted. / Off / Low / Medium / High
Start stop unit

*1  :Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.
*2  :Settings can be changed by operation of the remote transmitter button. Refer to the Workshop Manual for the detailed setting procedure.
*3  :The initialization setting varies depending on the market and specification.


Using audio unit (with color LCD)

Audio unit display

Function

Initial setting

Setting content

Control unit
Walk Away Lock.
The out-of-area (reception area) type auto lock function can be set.
OFF
OFF / ON
Start stop unit
Auto Re-lock Time.
The operation start time of the auto re-lock function can be changed.
30 seconds
30 seconds / 60 seconds / 90 seconds
Start stop unit
Lock Beep Volume.*1
The keyless beeper volume can be adjusted.
Medium
Off / Low / Medium / High
Start stop unit

*1  :Settings can be changed by operation of the remote transmitter button. Refer to the Workshop Manual for the detailed setting procedure.


Keyless Entry System


Using Mazda Modular Diagnostic System (M-MDS)

M-MDS display

Function

Initial setting

Setting content

Control unit
Advanced keyless function.*1
The keyless entry system and push button start system functions can be disabled.
Enabled
Enabled. / Disabled.
Start stop unit
Auto Re-lock Time.
The operation start time of the auto re-lock function can be changed.
30 seconds
Not Adopted. / 30 seconds / 60 seconds / 90 seconds
Start stop unit

*1  :Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.


Using audio unit (with color LCD)

Audio unit display

Function

Initial setting

Setting content

Control unit
Auto Re-lock Time.
The operation start time of the auto re-lock function can be changed.
30 seconds
30 seconds / 60 seconds / 90 seconds
Start stop unit


Power Door Lock System


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Auto Door Lock Mode*1
Auto door lock function can be changed.
Lock: Driving, Unlock: IGN Off
Not Adopted. / OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P.
Rear body control module (RBCM)

*1  :With auto door lock function.

Note
•  The 2-step unlocking function setting can be changed by operating the remote transmitter buttons. Refer to the Workshop Manual for the detailed setting procedure.