FRONT SASH MOLDING REMOVAL

id091600805000

Warning

•  Using a utility knife with bare hands can cause injury. Always wear gloves when using a utility knife.

1.  Remove the front door garnish. (See FRONT DOOR GARNISH REMOVAL/INSTALLATION.)

2.  Using a utility knife, carefully remove the double-sided adhesive tape in the locations shown below.

Caution

•  When removing the double-sided adhesive tape, be careful not to damage clip A.

am6zzw00009339

3.  Insert a tape-wrapped flathead screwdriver shown in the figure and remove the protector in the direction of arrow (1).

am6zzw00009340

4.  Insert a tape-wrapped flathead screwdriver shown in the figure and remove clip A in the direction of arrow (2).

am6zzw00009341

5.  Remove the front sash molding in the direction of arrow in the order of (3), (4), (5).