INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE

id092200033600


Smart Brake Support (SBS)


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Smart Brake Support Volume.
The volume of the smart brake support (SBS) warning alarm can be changed.
High
Not Adopted. / OFF / Low / High
Instrument cluster


Using instrument cluster (type A only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "SBS" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
ON/OFF
The operation of smart brake support (SBS) can be turned off.
ON
ON / OFF
Vehicle control module (V/C-Module)
Distance*
The detection range of Smart Brake Support (SBS) system can be changed.
Near
Near / Far
Vehicle control module (V/C-Module)
Volume
The volume of the smart brake support (SBS) warning alarm can be changed.
High
High / Low / OFF
Instrument cluster

*  :Except for European specs and U.K. specs (These specs cannot change the detection range of Smart Brake Support (SBS) system.)


Smart City Brake Support (SCBS)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
SCBS
The operation of smart city brake support (SCBS) can be turned off.
ON
ON / OFF
Laser sensor


Rear Vehicle Monitoring (RVM) System


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
RVM Volume.
The volume of the rear vehicle monitoring (RVM) warning alarm can be changed.
High
Not Adopted. / OFF / Low / High
Instrument cluster


Using instrument cluster (type A only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "RVM" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Volume
The volume of the rear vehicle monitoring (RVM) warning alarm can be changed.
High
High / Low / OFF
Instrument cluster


Blind Spot Monitoring (BSM) System


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
BSM Volume.
The volume of the blind spot monitoring (BSM) warning alarm can be changed.
High
Not Adopted. / OFF / Low / High
Instrument cluster


Using instrument cluster (type A only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "BSM" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Volume
The volume of the blind spot monitoring (BSM) warning alarm can be changed.
High
High / Low / OFF
Instrument cluster


Lane Departure Warning System (LDWS)

Note
•  For personalization of the warning timing and sensitivity, refer to the FORWARD SENSING CAMERA (FSC) PERSONALIZATION FEATURES SETTING PROCEDURE. (See FORWARD SENSING CAMERA (FSC) PERSONALIZATION FEATURES SETTING PROCEDURE.)

Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
LDWS Sound.
The type of the LDWS warning alarm can be changed.
Rumble
Beep / Rumble
Instrument cluster
LDWS Volume.
The volume of the LDWS warning alarm can be changed.
Volume 1
Not Adopted. / Volume 1 / Volume 2 / Volume 3
Instrument cluster


Using instrument cluster (type A only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "LDWS" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Sound
The type of LDWS warning alarm can be changed.
Rumble
Rumble / Beep
Instrument cluster
Volume
The volume of the LDWS warning alarm (Rumble) can be changed.
Low
High / Medium / Low
Instrument cluster
Volume
The volume of the LDWS warning alarm (Beep) can be changed.
Low
High / Low
Instrument cluster


Distance Recognition Support System (DRSS)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "DRSS" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
ON/OFF
The operation of distance recognition support system (DRSS) can be turned off.
ON
ON / OFF
Vehicle control module (V/C-Module)
Distance
The operation distance for the alert function can be changed.
Near
Near / Medium / Far
Vehicle control module (V/C-Module)


Turn And Hazard Indicator Alarm


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Turn Signal Volume.
The volume of the turn and hazard indicator alarm can be changed.
High
Not Adopted. / Low / High
Instrument cluster


Using instrument cluster (type A only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "Volumes" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Turn Signal
The volume of the turn and hazard indicator alarm can be changed.
High
High / Low
Instrument cluster


Lights-on Reminder Warning Alarm


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Lights-on Reminder Volume.
The volume for the lights-on reminder warning alarm can be changed.
High
Not Adopted. / OFF / Low / High
Instrument cluster


Using instrument cluster (type A only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "Volumes" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Light-on
The volume for the lights-on reminder warning alarm can be changed.
High
High / Low / OFF
Instrument cluster


Language (type A instrument cluster only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Language
The display language can be changed.
English
Instrument cluster


Distance (type A instrument cluster only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "Units" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Distance
The distance unit can be changed.
km or miles
km / miles
Instrument cluster


Temperature (type A instrument cluster only)

Note
•  When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO button for the steering switch.

3.  Select "Units" by operating the up/down switch and INFO button for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Temperature
The temperature unit can be changed.
°C or °F
°C /°F
Instrument cluster


Instrument Cluster Operation Sound (type A instrument cluster only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO switch for the steering switch.

3.  Select "Volumes" by operating the up/down switch and INFO switch for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Button Beep
The sound volume for the following operations can be changed.
•  Trip computer data is reset
―  INFO switch is pressed for 1.5 s or more while average fuel economy/average vehicle speed is displayed.
•  Scrolling value is operated
―  Up/down switch on period setting screen of maintenance monitor is pressed for 1.5 s or more.
High
High / Low / OFF
Instrument cluster


Average fuel economy reset method (type A instrument cluster only)

1.  Switch the ignition ON (engine off or on).

2.  Select "Setting" by operating the up/down switch and INFO switch for the steering switch.

3.  Select "Reset Averages" by operating the up/down switch and INFO switch for the steering switch.

4.  Select the following items and change the setting.

LCD

Function

Initial setting

Setting contents

Control unit
Consumption
The reset method for the average fuel economy can be changed.
Reset Now
Reset Now / Reset w/ Trip A
Instrument cluster