SCHEDULED MAINTENANCE


id000000801200


Scheduled Maintenance Table for Europe (L.H.D., U.K.)

Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months
12
24
36
48
60
72
84
96
108
×1000 km
20
40
60
80
100
120
140
160
180
×1000 miles
12.5
25
37.5
50
62.5
75
87.5
100
112.5
GASOLINE ENGINE
Spark plugs*1
Replace every 120,000 km (75,000 miles).
Air cleaner element*2
 
 
R
 
 
R
 
 
R
Evaporative system (if installed)
 
 
I
 
 
I
 
 
I
Engine oil & filter
Flexible*3
Replace when indicator is ON. (Max interval: 12 months or 20,000 km (12,500 miles))
Other than flexible*4
R
R
R
R
R
R
R
R
R
DIESEL ENGINE
Engine oil & filter
Flexible*3
Replace when indicator is ON. (Max interval: 12 months or 20,000 km (12,500 miles))
Other than flexible*4*6
R
R
R
R
R
R
R
R
R
Ukraine*5*6
Replace every 12 months or 10,000 km (6,250 miles).
Fuel filter
Except Ukraine
 
 
R
 
 
R
 
 
R
Ukraine
 
R
 
R
 
R
 
R
 
Fuel lines and hoses
Except Ukraine
 
I
 
I
 
I
 
I
 
Ukraine
I
I
I
I
I
I
I
I
I
Fuel injection system*7
I
 
 
I
 
 
I
 
 
Fuel system (Drain water)
*8
Air cleaner element*2
C
C
R
C
C
R
C
C
R
GASOLINE AND DIESEL ENGINE
Drive belts*9
 
 
I
 
 
I
 
 
I
Cooling system
 
I
 
I
 
I
 
I
 
Engine coolant*10
Replace at first 200,000 km (125,000 miles) or 10 years; after that, every 100,000 km (62,500 miles) or 5 years.
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
Battery*11
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
I
I
I
I
I
I
I
Brake fluid*12
 
R
 
R
 
R
 
R
 
Parking brake
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
Manual transaxle oil
Replace every 180,000 km (112,500 miles).
Rear differential oil
*13*14
Transfer oil
*14
Front and rear suspension, ball joints and wheel bearing axial play
 
I
 
I
 
I
 
I
 
Drive shaft dust boots
 
I
 
I
 
I
 
I
 
Exhaust system and heat shields
Inspect every 80,000 km (50,000 miles) or 5 years.
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
Body condition (for rust, corrosion and perforation)
Inspect annually.
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
Tires (including spare tire) (with inflation pressure adjustment)*15*16
I
I
I
I
I
I
I
I
I
Emergency flat tire repair kit (if installed)*17
Inspect annually.

Chart symbols
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
Remarks (Emission control and related systems)
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 12 months before replacing them at the said interval.
Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Latvia, Macedonia, Moldova, Montenegro, Romania, Serbia, Ukraine.
*2: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*3: SKYACTIV-G vehicles can select flexible setting only some countries in Europe. Consult an Authorised Mazda Repairer for details. Flexible setting can be set if the vehicle is operated mainly where none of the following conditions apply.
a.  Purpose of vehicle use is police car, taxi or driving school car.
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
Once the flexible maintenance is selected, the vehicle calculates the remaining oil life based on engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.
Replace the engine oil and filter when message/wrench indicator light is ON. And they must be changed at least once a year or within 20,000 km(12,500 miles) since last engine oil and filter change.
The system must be reset whenever replacing the engine oil regardless of the message/wrench indicator light display.
*4: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km (6,250 miles) or shorter.
a.  Purpose of vehicle use is police car, taxi or driving school car.
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
d.  Driving for long period in cold temperatures or driving regularly at short distance only
e.  Driving in extremely hot conditions
f.  Driving in mountainous conditions continually
*5: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 5,000 km (6,250 miles) or 6 months.
a.  Purpose of vehicle use is police car, taxi or driving school car.
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
d.  Driving for long period in cold temperatures or driving regularly at short distance only
e.  Driving in extremely hot conditions
f.  Driving in mountainous conditions continually
*6: For Diesel engine, reset the engine oil data after replacing the engine oil.
*7: Implement the fuel injection amount correction.
*8: Drain water in the fuel system if the indicator lights is ON.
*9: Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 20,000 km (12,500 miles) or 12 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*10: Use of FL22 is recommended when replacing engine coolant. Using engine coolant other than FL22 may cause serious damage to the engine and cooling system.
*11: Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.
*12: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*13: If the vehicle is operated primarily under any of the following conditions, replace the rear differential oil at every 45,000 km (27,000 miles).
a.  Towing a trailer or using a car-top carrier
b.  Driving in dusty, sandy or wet condition
c.  Extended periods of idling or low speed operation
d.  Repeated short trips of less than 16 km (10 miles)
*14: If this component has been submerged in water, the oil should be replaced.
*15: Tire rotation is recommended every 10,000 km (6,250 miles).
*16: The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).
*17: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.

Scheduled Maintenance Table for Australia

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

GASOLINE ENGINE
Fuel filter
Replace every 150,000 km
Spark plugs
Replace every 120,000 km
Air cleaner element*1
 
 
C
 
 
R
 
 
C
 
 
R
 
 
C
 
Evaporative system (if installed)
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
DIESEL ENGINE
Fuel filter
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Fuel injection system*2
 
I
 
 
 
 
 
I
 
 
 
 
 
I
 
 
Air cleaner element*1
 
C
 
C
 
R
 
C
 
C
 
R
 
C
 
C
GASOLINE AND DIESEL ENGINE
Drive belts*3
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil*4*5
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter*4
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant*6
Replace at first 200,000 km or 10 years; after that, every 100,000 km or 5 years
Fuel lines and hoses
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Battery*7
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Brake lines, hoses and connections
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Brake fluid*8
I
I
I
R
I
I
I
R
I
I
I
R
I
I
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Front and rear suspension, ball joints and wheel bearing axial play
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Drive shaft dust boots
 
 
 
I
 
 
 
I
 
 
 
I
 
 
 
I
Exhaust system and heat shields
Inspect every 80,000 km
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
 
T
 
T
All electrical system*9
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Cabin air filter (if installed)
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Tires (including spare tire) (with inflation pressure adjustment)*10
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire rotation*10*11
Rotate every 10,000 km or 6 months
Road test
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
M-MDS check of Vehicle Management and Safety Systems
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I

Chart symbols
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
Note
•  Please ask Mazda dealer to check Mazda computer network to ensure there are no outstanding campaign or recall actions on the vehicle.
Remarks (Emission control and related systems)
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*2: Implement the fuel injection amount correction.
*3: Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*4: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*5: Reset the engine oil data after replacing the engine oil.
*6: Use of FL22 is recommended when replacing engine coolant. Using engine coolant other than FL22 may cause serious damage to the engine and cooling system.
*7: Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.
*8: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*9: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.
*10: The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).
*11: If the vehicle is operated primarily under any of the following conditions, rotate the tires more often than the recommended intervals.
a.  Driving on bumpy roads, gravel roads, snowy roads or dirt roads
b.  Driving uphill and downhill frequently
c.  Repeated short-distance driving
d.  On roads having many roundabouts

Scheduled Maintenance Table for Russia/Belarus/Azerbaijan/Kazakhstan

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

15

30

45

60

75

90

105

120

135

150

165

180

Drive belts*1
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil
Russia/Belarus/Kazakhstan*2
R
R
R
R
R
R
R
R
R
R
R
R
Azerbaijan*3
Replace every 5,000 km or 6 months.
Engine oil filter
Russia/Belarus/Kazakhstan*2
R
R
R
R
R
R
R
R
R
R
R
R
Azerbaijan*4
Replace every 10,000 km or 12 months.
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant*5
Replace at first 195,000 km or 10 years; after that, every 90,000 km or 5 years.
Air cleaner element*6
Russia/Belarus/Kazakhstan
C
C
R
C
C
R
C
C
R
C
C
R
Azerbaijan
C
R
C
R
C
R
C
R
C
R
C
R
Fuel filter
Russia/Belarus/Kazakhstan
Replace every 120,000 km.
Azerbaijan
Replace every 60,000 km.
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
Spark plugs
I
I
I
I
I
I
I
R
I
I
I
I
Evaporative system (if installed)
 
 
 
I
 
 
 
I
 
 
 
I
Battery*7
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid*8
 
R
 
R
 
R
 
R
 
R
 
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
I
I
I
I
I
I
I
I
Manual transaxle oil
 
 
 
 
R
 
 
 
 
R
 
 
Front and rear suspension, ball joints and wheel bearing axial play
I
I
I
I
I
I
I
I
I
I
I
I
Drive shaft dust boots
I
I
I
I
I
I
I
I
I
I
I
I
Exhaust system and heat shields
I
I
I
I
I
I
I
I
I
I
I
I
Bolts and nuts on chassis and body
T
T
T
T
T
T
T
T
T
T
T
T
Hinges and catches
L
L
L
L
L
L
L
L
L
L
L
L
All electrical system
I
I
I
I
I
I
I
I
I
I
I
I
Body condition (for rust, corrosion and perforation)
Inspect annually.
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire) (with inflation pressure adjustment)*9*10
I
I
I
I
I
I
I
I
I
I
I
I
Flat tire repair kit (if installed)*11
Inspect annually.

Chart symbols
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
L: Lubricate
Remarks (Emission control and related systems)
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 7,500 km or 6 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 7,500 km or 6 months.
a.  Purpose of vehicle use is police car, taxi or driving school car
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
d.  Driving for long period in cold temperatures or driving regularly at short distance only
e.  Driving in extremely hot conditions
f.  Driving in mountainous conditions continually
*3: If the vehicle is operated primarily under any of the following conditions, replace the engine oil at every 2,500 km or 3 months.
a.  Purpose of vehicle use is police car, taxi or driving school car.
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
d.  Driving for long period in cold temperatures or driving regularly at short distance only
e.  Driving in extremely hot conditions
f.  Driving in mountainous conditions continually
*4: If the vehicle is operated primarily under any of the following conditions, replace the engine oil filter at every 5,000 km or 6 months.
a.  Purpose of vehicle use is police car, taxi or driving school car.
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
d.  Driving for long period in cold temperatures or driving regularly at short distance only
e.  Driving in extremely hot conditions
f.  Driving in mountainous conditions continually
*5: Use of FL22 is recommended when replacing engine coolant. Using engine coolant other than FL22 may cause serious damage to the engine and cooling system.
*6: If the vehicle is operated in very dusty or sandy areas, clean the air cleaner element at every 7,500 km or 6 months.
*7: Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.
*8: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*9: Tire rotation is recommended every 10,000 km.
*10: The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).
*11: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.

Scheduled Maintenance Table for Israel

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

15

30

45

60

75

90

105

120

135

150

165

180

Spark plugs
Replace every 120,000 km or 6 years.
Fuel filter
Replace every 135,000 km.
Evaporative system (if installed)
 
 
 
I
 
 
 
I
 
 
 
I
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
Drive belts*1
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil*2
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter*2
R
R
R
R
R
R
R
R
R
R
R
R
Air cleaner element*3
C
C
C
R
C
C
C
R
C
C
C
R
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant*4
Replace at first 195,000 km or 10 years;
after that, every 90,000 km or 5 years.
Battery*5
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid*6
I
R
I
R
I
R
I
R
I
R
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
Front and rear suspension, ball joints and wheel bearing axial play
I
I
I
I
I
I
I
I
I
I
I
I
Drive shaft dust boots
 
 
I
 
 
I
 
 
I
 
 
I
Exhaust system and heat shields
Inspect every 75,000 km.
Bolts and nuts on chassis and body
T
T
T
T
T
T
T
T
T
T
T
T
Body condition (for rust, corrosion and perforation)
Inspect annually.
Cabin air filter (if installed)
R
R
R
R
R
R
R
R
R
R
R
R
Tires (including spare tire) (with inflation pressure adjustment)*7
I
I
I
I
I
I
I
I
I
I
I
I

Chart symbols
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
Remarks (Emission control and related systems)
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 10,000 km or shorter.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km or shorter.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*3: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*4: Use of FL22 is recommended when replacing engine coolant. Using engine coolant other than FL22 may cause serious damage to the engine and cooling system.
*5: Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.
*6: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*7: The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).

Scheduled Maintenance Table for General (except for Europe (L.H.D., U.K.), Australia, Russia/Belarus/Azerbaijan/Kazakhstan, Israel)

Maintenance Interval
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
54
60
66
72
78
84
90
96
×1000 km
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
×1000 miles
6.25
12.5
18.75
25
31.25
37.5
43.75
50
56.25
62.5
68.75
75
81.25
87.5
93.75
100
GASOLINE ENGINE
Engine oil*1
Except below countries
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Georgia/Armenia/Cambodia/Gabon/Ghana/Cameroon/Burundi/Mozambique/Mongolia
Replace every 5,000 km (3,125 miles) or 6 months.
Tanzania
Replace every 3,000 km (1,875 miles) or 3 months.
Engine oil filter*1
Except below countries
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Georgia/Armenia/Cambodia
Replace every 10,000 km (6,250 miles) or 1 year.
Gabon/Ghana/Cameroon/Burundi/Mozambique/Mongolia
Replace every 5,000 km (3,125 miles) or 6 months.
Tanzania
Replace every 3,000 km (1,875 miles) or 3 months.
Fuel filter
Replace every 60,000 km (37,500 miles).
Spark plugs*2
Replace every 120,000 km (75,000 miles).
Evaporative system (if installed)
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
DIESEL ENGINE
Engine oil*1*3
Except below countries
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Malaysia/Philippines
Replace every 5,000 km (3,125 miles) or 6 months.
Engine oil filter*1
Except below countries
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Malaysia/Philippines
Replace every 10,000 km (6,250 miles) or 1 year.
Fuel filter
Except below countries
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Malaysia/Philippines
 
R
 
R
 
R
 
R
 
R
 
R
 
R
 
R
Fuel injection system*4
 
I
 
 
 
 
 
I
 
 
 
 
 
I
 
 
GASOLINE AND DIESEL ENGINE
Drive belts*5
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant*6
Replace at first 200,000 km (125,000 miles) or 10 years; after that, every 100,000 km(62,500 miles) or 5 years.
Air cleaner element*7
Except below countries
 
C
 
C
 
R
 
C
 
C
 
R
 
C
 
C
Georgia/Armenia
 
C
 
R
 
C
 
R
 
C
 
R
 
C
 
R
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Battery*8
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake lines, hoses and connections
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake fluid*9
I
I
I
R
I
I
I
R
I
I
I
R
I
I
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Manual transaxle oil
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Rear differential oil
*10*11
Transfer oil
*11
Front and rear suspension, ball joints and wheel bearing axial play
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Drive shaft dust boots
 
 
 
I
 
 
 
I
 
 
 
I
 
 
 
I
Exhaust system and heat shields
Inspect every 80,000 km (50,000 miles).
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
 
T
 
T
Body condition (for rust, corrosion and perforation)
Inspect annually.
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire) (with inflation pressure adjustment)*12
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire rotation*12
Rotate every 10,000 km (6,250 miles).
Emergency flat tire repair kit (if installed)*13
Inspect annually.

Chart symbols
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
Remarks (Emission control and related systems)
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.
a.  Purpose of vehicle use is police car, taxi or driving school car.
b.  Driving in dusty conditions
c.  Extended periods of idling or low speed operation
d.  Driving for long period in cold temperatures or driving regularly at short distance only
e.  Driving in extremely hot conditions
f.  Driving in mountainous conditions continually
*2: In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 1 year before replacing them at the said interval.
Armenia, Angola, Bolivia, Burundi, B.Virgin, Cambodia, Chile, Costa Rica, Curacao, El Salvador, Ghana, Georgia, Guatemala, Haiti, Honduras, Hong Kong, Iran, Jordan, Macau, Mozambique, Myanmar, Nigeria, Nicaragua, Papua New Guinea, Peru, Seychelles, Syria, Tanzania, Vietnam, Zaire
*3: For Diesel engine, reset the engine oil data after replacing the engine oil.
*4: Implement the fuel injection amount correction.
*5: Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*6: Use of FL22 is recommended when replacing engine coolant. Using engine coolant other than FL22 may cause serious damage to the engine and cooling system.
*7: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*8: Inspect the battery electrolyte level, specific gravity and outer appearance. If the vehicle is operated in extremely hot and cold areas, inspect the battery electrolyte level, specific gravity and appearance every 10,000 km (6,250 miles) or 6 months. The sealed battery only requires an outer appearance inspection.
*9: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*10: If the vehicle is operated primarily under any of the following conditions, replace the rear differential oil at every 45,000 km (27,000 miles).
a.  Towing a trailer or using a car-top carrier
b.  Driving in dusty, sandy or wet condition
c.  Extended periods of idling or low speed operation
d.  Repeated short trips of less than 16 km (10 miles)
*11: If this component has been submerged in water, the oil should be replaced.
*12: The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).
*13: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.

Scheduled Maintenance Service (Specific Work Required)

•  The specific work required for each maintenance item is listed in the following table. (Please refer to the section applicable to the model serviced.)

Maintenance Item

Specific Work Required

ENGINE
Engine valve clearance
Inspect engine valve clearance.
Engine timing belt
Replace engine timing belt.
Drive belts
Inspect for wear, cracks, fraying and tension.
Engine oil
Replace engine oil and inspect for leakage.
Engine oil filter
Replace engine oil filter and inspect for leakage.
IGNITION SYSTEM
Spark plugs
Inspect for wear, damage, carbon, plug gap and high-tension lead condition.
COOLING SYSTEM
Engine coolant level
Check engine coolant level and quality, and inspect for leakage.
Cooling system (Including coolant level adjustment)
Check engine coolant level and quality, and inspect for leakage.
Engine coolant
Replace engine coolant.
FUEL SYSTEM
Air cleaner element
Clean air cleaner element (by blowing air).
Air cleaner element
Replace air cleaner element.
Fuel filter (CE)
Replace fuel filter.
Fuel filter (DE)
Replace fuel filter.
Fuel lines and hoses
Inspect for cracks, leakage and loose connection.
Fuel injection system
Update to injection amount correction with M-MDS (see W/M).
Fuel system (Drain water)
Drain water in fuel system.
EMISSION CONTROL SYSTEM
Evaporative system
Check system operation (see W/M), vapor lines, vacuum fitting hoses and connection.
Hoses and tubes for emission
Check system operation (see W/M), vapor lines, vacuum fitting hoses and connection.
ELECTRICAL SYSTEM
Battery
Inspect the battery electrolyte level, specific gravity and outer appearance. If the vehicle is operated in extremely hot and cold areas, inspect the battery electrolyte level, specific gravity and appearance every 10,000 km (6,250 miles) or 6 months. The sealed battery only requires an outer appearance inspection.
Battery condition
Check battery for corroded or loose connections and cracks.
Function of all lights
Check function of lighting system.
All electrical system
Check function of lighting system, windshield wiper (including wiper blade condition), washer and power windows.
CHASSIS AND BODY
Brake fluid
Check brake fluid level and for leakage.
Brake fluid
Replace brake fluid.
Brake and clutch fluid level
Check brake fluid level and for leakage.
Washer fluid level
Check washer fluid level.
Brake lines, hoses and connections
Inspect for cracks, damage, chafing, corrosion, scars, swelling and fluid leakage.
Parking brake
Check parking lever stroke. Check parking brake operation.
Power brake unit and hoses
Check vacuum lines, connections, and check valve for improper attachment, air tightness, cracks chafing and deterioration.
Power brake unit (Brake booster) and hoses
Disc brakes
Inspect caliper for correct operation and fluid leakage, brake pads for wear. Check disc plate condition and thickness. Test for judder and noise.
Drum brakes
Inspect brake drum for wear and scratches: brake lining for wear, peeling and cracks; wheel cylinder for fluid leakage. Test for judder and noise.
Power steering fluid, lines, hoses and connections
Check power steering fluid level and lines for improper attachment, leakage, cracks, damage, loose connections, chafing and deterioration.
Power steering fluid level
Check power steering fluid level.
Steering operation and linkages
Check that the steering wheel has the specified play. Be sure to check for changes, such as excessive play, hard steering or strange noises. Check gear housing and boots for looseness, damage and grease/gear oil leakage. Check ball joint, dust cover and other components for looseness, wear, damage and grease leakage.
Front and rear suspension, ball joints and wheel bearing axial play
Inspect for grease leakage, crack, damage, looseness and wheel bearing play/ noise.
Manual transmission/ transaxle oil
Check manual transaxle for leakage (type "B76M-R" only)
Manual transmission/ transaxle oil
Replace manual transmission/ transaxle oil.
Rear differential oil
Replace transfer oil
Drive shaft dust boots
Inspect for grease leakage, crack, damage and looseness.
Bolts and nuts on chassis and body
Tighten bolts and nuts fastening suspension components, members and seat frames.
Body condition (for rust, corrosion and perforation)
Inspect body surface for paint damage, rust, corrosion and perforation.
Exhaust system and heat shields
Inspect for damage, corrosion, looseness of connections and gas leakage.
Tire rotation
Rotate tires.
Tires (Including spare tire) (with inflation pressure adjustment)
Check air pressure and inspect tires for tread wear, damage, cracks; and wheels for damage and corrosion.
Tire inflation pressure and tire wear
Check air pressure and inspect tires for tread wear, damage, cracks; and wheels for damage and corrosion.
Flat tire repair kit
Check tire repair fluid expiration date.
Hinges and catches
Lubricate hinges and catches of doors, trunk lid and hood.
All locks and hinges
Lubricate hinges and catches of doors, trunk lid and hood.
Road test
Check brake operation/ clutch operation/ steering control/ operation of meters and gauges/ squeaks, rattles, or unusual noises/ engine general performance/ emergency locking retractors.
M-MDS check of Vehicle Management and Safety Systems
Check the items below with M-MDS (see W/M).
1.  Retrieve All CMDTCs
2.  PCM function test (except Tribute and diesel engine models)
3.  PCM Input/Output Data Monitor (except Tribute and diesel engine models)
4.  Adviser Comment (except Tribute and diesel engine models)
AIR CONDITIONER SYSTEM
Cabin air filter
Replace cabin air filter.