FRONT LOWER ARM INSPECTION

id021300800700

1.  Remove the front lower arm. (See FRONT LOWER ARM REMOVAL/INSTALLATION.)

2.  Inspect the front lower arm for bending or damage, and the front lower arm ball joint for excessive looseness.

•  If there is any malfunction, replace the front lower arm.

3.  Rotate the front lower arm ball joint stud 5 times. Install the SST to the front lower arm ball joint stud, measure the rotational, starting torque using a torque wrench.

ac5uuw00000125

•  If not within the specification, replace the front lower arm.