PID/DATA MONITOR TABLE [SAS CONTROL MODULE]

id0802g6081000

PID name (definition)

Unit/Operation

Operation Status (Reference)

AB_WL

(Air bag system warning light status)

Lamp_Off/Lamp_On/Plant_Mode/Unknown

•  Air bag system warning light off: Lamp_Off

•  Air bag system warning light on: Lamp_On

•  Air bag system warning light status: Plant_Mode

•  Air bag system warning light status: Unknown

B_SW_P_FLT

(Passenger-side buckle switch status)

O.K./FAULT

•  Passenger-side buckle switch is normal: O.K.

•  Passenger-side buckle switch is abnormal: FAULT

D_SP_S_FLT

Note

•  Displays in the M-MDS but it does not operate.

D_SP_S_ST

Note

•  Displays in the M-MDS but it does not operate.

OCS_DTC_CLR

Note

•  Displays in the M-MDS but it does not operate.

P_OCS_ST

Note

•  Displays in the M-MDS but it does not operate.

P_WEIGHT

Note

•  Displays in the M-MDS but it does not operate.

P_SEAT_M_S

(Occupancy sensor)

Off/On

•  Not occupant seated in passenger-side front seat: Off

•  Occupant seated in passenger-side front seat: On

PAD_SW

(PAD switch status)

Off/On

•  PAD switch off: Off

•  PAD switch on: On

PAD_SW_FLT

(PAD switch malfunction status)

O.K./FAULT

•  PAD switch is normal: O.K.

•  PAD switch is abnormal: FAULT

RES_C_AB_D

(Driver-side curtain air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1

RES_C_AB_P

(Passenger-side curtain air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1

RES_F_AB1_D

(Driver-side air bag module resistance nominal)

ohm

Continuous: 0.99–6.42 ohms or 0.00–0.09 ohms^*1

RES_F_AB1_P

(Passenger-side air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1

RES_F_AB2_D

Note

•  Displays in the M-MDS but it does not operate.

RES_F_AB2_P

Note

•  Displays in the M-MDS but it does not operate.

RES_PCD_BAR

(Poorly connected detector bar terminals resistance nominal (all of SAS control module connectors))

ohm

•  Normal connected: 100 ohms or less

•  Poor connected: 20 kilohms or more

RES_S_AB_D

(Driver-side side air bag module resistance nominal)

ohm

Continuous: 0.81–9.85 ohms or 0.00–0.09 ohms^*1

RES_S_AB_P

(Passenger-side side air bag module resistance nominal)

ohm

Continuous: 0.81–9.85 ohms or 0.00–0.09 ohms^*1

RES_SB_LP_D

Note

•  Displays in the M-MDS but it does not operate.

RES_SB_LP_P

Note

•  Displays in the M-MDS but it does not operate.

RES_SB_P_D

(Driver-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1

RES_SB_P_P

(Passenger-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1

SEAT_B_D

(Driver-side buckle switch status)

Unbuckled/Buckled

•  Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled

•  Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled

SEAT_B_P

(Passenger-side buckle switch status)

Unbuckled/Buckled

Occupant seated in passenger-side front seat: On

•  Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled

•  Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled

VPWR_IGA

(SAS control module power voltage)

V

Ignition switch is at ON: approx. 12 V

PID name (definition)	Unit/Operation	Operation Status (Reference)
AB_WL (Air bag system warning light status)	Lamp_Off/Lamp_On/Plant_Mode/Unknown	• Air bag system warning light off: Lamp_Off • Air bag system warning light on: Lamp_On • Air bag system warning light status: Plant_Mode • Air bag system warning light status: Unknown
B_SW_P_FLT (Passenger-side buckle switch status)	O.K./FAULT	• Passenger-side buckle switch is normal: O.K. • Passenger-side buckle switch is abnormal: FAULT
D_SP_S_FLT	Note • Displays in the M-MDS but it does not operate.
D_SP_S_ST	Note • Displays in the M-MDS but it does not operate.
OCS_DTC_CLR	Note • Displays in the M-MDS but it does not operate.
P_OCS_ST	Note • Displays in the M-MDS but it does not operate.
P_WEIGHT	Note • Displays in the M-MDS but it does not operate.
P_SEAT_M_S (Occupancy sensor)	Off/On	• Not occupant seated in passenger-side front seat: Off • Occupant seated in passenger-side front seat: On
PAD_SW (PAD switch status)	Off/On	• PAD switch off: Off • PAD switch on: On
PAD_SW_FLT (PAD switch malfunction status)	O.K./FAULT	• PAD switch is normal: O.K. • PAD switch is abnormal: FAULT
RES_C_AB_D (Driver-side curtain air bag module resistance nominal)	ohm	Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1
RES_C_AB_P (Passenger-side curtain air bag module resistance nominal)	ohm	Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1
RES_F_AB1_D (Driver-side air bag module resistance nominal)	ohm	Continuous: 0.99–6.42 ohms or 0.00–0.09 ohms^*1
RES_F_AB1_P (Passenger-side air bag module resistance nominal)	ohm	Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1
RES_F_AB2_D	Note • Displays in the M-MDS but it does not operate.
RES_F_AB2_P	Note • Displays in the M-MDS but it does not operate.
RES_PCD_BAR (Poorly connected detector bar terminals resistance nominal (all of SAS control module connectors))	ohm	• Normal connected: 100 ohms or less • Poor connected: 20 kilohms or more
RES_S_AB_D (Driver-side side air bag module resistance nominal)	ohm	Continuous: 0.81–9.85 ohms or 0.00–0.09 ohms^*1
RES_S_AB_P (Passenger-side side air bag module resistance nominal)	ohm	Continuous: 0.81–9.85 ohms or 0.00–0.09 ohms^*1
RES_SB_LP_D	Note • Displays in the M-MDS but it does not operate.
RES_SB_LP_P	Note • Displays in the M-MDS but it does not operate.
RES_SB_P_D (Driver-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1
RES_SB_P_P (Passenger-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.81–6.42 ohms or 0.00–0.09 ohms^*1
SEAT_B_D (Driver-side buckle switch status)	Unbuckled/Buckled	• Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled • Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled
SEAT_B_P (Passenger-side buckle switch status)	Unbuckled/Buckled	Occupant seated in passenger-side front seat: On	• Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled • Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled
VPWR_IGA (SAS control module power voltage)	V	Ignition switch is at ON: approx. 12 V

^*1: When measuring the resistance using the M-MDS data monitor function, the SAS control module indicates the resistance on a scale of one hundredth for the following part numbers.

― BHP1-57K30 (no suffix)

― B60T-57K30 (no suffix)

― BRE7-57K30 (no suffix)

― B60S-57K30 (no suffix)