SUPPLIER IDENTIFICATION PROCEDURE [AUDIO]

id0902f6803800

Note

•  The supplier varies depending on the units. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form using the following procedures.

Identification with the label

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

3.  Remove the decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION.)

4.  Remove the audio unit. (See AUDIO UNIT REMOVAL/INSTALLATION.)

5.  Verify the supplier name by referring to the label attached to the unit.

am6zzw00014534

Note

•  The supplier varies depending on the units. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form using the following procedures.

Verify Using the Diagnostic Assist Function

1.  Switch the ignition to ACC or ON (engine off or on).

2.  While pressing the POWER/VOLUME button, press preset button 5 for 3 s or more.

am6zzw00014476

3.  Identify the supplier code by referring to the display.

ac5jjw00001772

Supplier code	Supplier name
01	SANYO Automedia
02	Panasonic
03	Clarion
04	Pioneer
05	VISTEON
06	DESAY

Note

•  DTCs can also be identified from the DTC displays screen.

am3uuw00011251

4.  Switch the ignition off to end the diagnostic assist function.