PID/DATA MONITOR TABLE [FRONT BODY CONTROL MODULE (FBCM)]
id0902p2012000
|
PID |
Unit/Operation |
Data contents |
Data read/use method |
Inspection item(s) |
|---|---|---|---|---|
|
ABK_CS_BG*1
|
Off/On
|
• Off: Theft-deterrent system answer-back signal is not received.
• On: Theft-deterrent system answer-back signal is received.
|
—
|
• Front body control module (FBCM)
• Rear body control module (RBCM)
• Start stop unit
|
|
ABK_CS_KEY
|
Off/On
|
• Off: Keyless entry system answer-back signal is not received.
• On: Keyless entry system answer-back signal is received.
|
—
|
• Front body control module (FBCM)
• Rear body control module (RBCM)
• Start stop unit
|
|
ABK_HD_CS_R
|
Off/On
|
|
—
|
—
|
|
ABK_HN_CS_R
|
Off/On
|
|
—
|
—
|
|
ABK_HN_KEY
|
|
|||
|
BAT_TMP
|
°C, °F
|
Displays battery temperature.
|
—
|
Battery
|
|
BG_ALARM_CS*1
|
Off/On
|
• Off: Hazard warning light flashing request siganal is not received
• On: Hazard warning light flashing request siganal is received
|
—
|
• Front body control module (FBCM)
• Rear body control module (RBCM)
|
|
BLWR_MT_RY
|
Off/On
|
• Off: Blower relay is off.
• On: Blower relay is on.
|
—
|
Blower relay
|
|
BRAKE_SW
|
Off/On
|
• Off: Brake switch (No. 2 signal) is off. (Brake pedal is depressed.)
• On: Brake switch (No. 2 signal) is on. (Brake pedal is not depressed.)
|
—
|
• Brake switch
• PCM
• TCM
|
|
BRK_F_L_SW
|
Normal/Low/Unknown
|
• Normal: Brake fluid level is between MAX and MIN.
• Low: Brake fluid level is lower than MIN.
• Unknown: Brake fluid level is not determined.
|
—
|
Brake fluid level sensor
|
|
DCDC_CVT_ST
|
Wake_Up/Bypass/Boost_1/Boost_2/Boost_3/Error/Default
|
DC-DC converter status
|
—
|
DC-DC converter
|
|
DCDC_VLT_I
|
V
|
Displays DC-DC converter input voltage.
|
—
|
DC-DC converter
|
|
DCDC_VLT_O
|
V
|
Displays DC-DC converter output voltage.
|
—
|
DC-DC converter
|
|
DEFOG_F_CS
|
|
|||
|
DEFOG_R_CS
|
Off/On
|
• Off: Rear window defroster control signal is not received.
• On: Rear window defroster control signal is received.
|
—
|
• Front body control module (FBCM)
• Climate control unit
|
|
ENG_C_TMP
|
°C, °F
|
Displays engine coolant temperature.
|
—
|
• ECT sensor
• PCM
|
|
ESS_ST
|
Off/On
|
• Off: Emergency signal system (ESS) is not operated.
• On: Emergency signal system (ESS) is operated.
|
—
|
• Front body control module (FBCM)
• DSC HU/CM
|
|
F_FOG_LMP*2
|
Off/On
|
• Off: Front fog light is turned off.
• On: Front fog light is turned on.
|
—
|
Front fog light
|
|
F_FOG_SW*2
|
Off/On
|
• Off: Front fog light switch F.FOG signal is not received.
• On: Front fog light switch F.FOG signal is received.
|
—
|
• Front fog light switch
• Start stop unit
|
|
H/L
|
OFF/DRL*3/TNS/H/L_LOW/H/L_HI/
|
• OFF: Headlight is turned off.
• DRL: Running light is turned on.
• TNS: TNS is turned on.
• H/L_LOW: Headlight (LO) is turned on.
• H/L_HI: Headlight (HI) is turned on.
|
—
|
• Headlight relay (HI)/(LO)
• Parking light
• Taillight
• License plate light
• Running light
|
|
H/L_CLN_RY*4
|
Off/On
|
• Off: Headlight cleaner relay is off.
• On: Headlight cleaner relay is on.
|
—
|
• Front body control module (FBCM)
• Headlight cleaner relay
|
|
H/L_CS_RLS*5
|
Off/TNS_On/TNS+H/L_On
|
• Off: TNS and headlight on request signal is not received from auto light sensor.
• TNS_On: TNS on signal is received from auto light sensor.
• TNS+H/L_On: TNS and headlight LO on signal is received from auto light sensor.
|
—
|
Auto light sensor
|
|
H/L_HI
|
Off/On
|
• Off: Headlight HI is turned off.
• On: Headlight HI is turned on.
|
—
|
Headlight HI
|
|
H/L_SW_HI
|
Off/On
|
• Off: Light switch HI signal is not received.
• On: Light switch HI signal is received.
|
—
|
• Light switch
• Start stop unit
|
|
H/L_SW_LOW1
|
Off/On
|
Displays dimmer switch position of light switch sent from start stop unit via CAN signal.
• Off: Other than dimmer switch LO position of light switch is received
• On: Dimmer switch LO position of light switch is received
|
Verify if the monitor value switches when the dimmer switch of the light switch is switched between LO and HI positions. If the dimmer switch operation and monitor values do not match, inspect the start stop unit or CAN communication.
|
• Light switch
• Start stop unit
|
|
H/L_SW_OFF
|
Off/On
|
• Off: Light switch OFF signal is not received.
• On: Light switch OFF signal is received.
|
—
|
• Light switch
• Start stop unit
|
|
H/L_SW_PASS
|
Off/On
|
• Off: Light switch FLASH-TO-PASS signal is not received.
• On: Light switch FLASH-TO-PASS signal is received.
|
—
|
• Light switch
• Start stop unit
|
|
H/L_SW_TNS
|
Off/On
|
• Off: Light switch TNS signal is not received.
• On: Light switch TNS signal is received.
|
—
|
• Light switch
• Start stop unit
|
|
H/L_TNS
|
Off/On
|
• Off: TNS is turned off.
• On: TNS is turned on.
|
—
|
• Parking light
• Taillight
• License plate light
|
|
HAZARD_LMP
|
Off/On
|
• Off: Hazard light is turned off.
• On: Hazard light is turned on.
|
—
|
• Front turn light
• Side turn light
• Rear turn light
|
|
HAZARD_SW
|
Off/On/Unknown
|
• Off: Hazard warning switch is not pressed.
• On: Hazard warning switch is pressed.
• Unknown: Hazard warning switch on/off is not determined.
|
—
|
• Hazard warning switch
• Start stop unit
|
|
HBC_CS*6
|
Off/On/Invalid
|
• Off: High beam control (HBC) system signal is not received.
• On: High beam control (HBC) system signal is received.
• Invalid: High beam control (HBC) system signal has error.
|
—
|
Forward sensing camera (FSC)
|
|
HBC_ST*6
|
Off/On
|
• Off: High beam control (HBC) system is not operated.
• On: High beam control (HBC) system is operated.
|
—
|
Forward sensing camera (FSC)
|
|
HEAT_CS_R
|
|
|||
|
IG_ST
|
Off/On
|
• Off: IG1 is off.
• On: IG1 is on.
|
—
|
• IG1 relay
• PCM
• Start stop unit
|
|
L_OFF_AUTO*7
|
Off/On
|
• Off: TNS or headlight off control by auto light off system is not operated.
• On: TNS or headlight off control by auto light off system is operated.
|
—
|
• Front body control module (FBCM)
• Auto light sensor
|
|
L_OFF_BS
|
|
|||
|
OIL_P_SW
|
|
|||
|
OUT_CAR_TMP
|
°C, °F
|
Displays ambient temperature.
|
—
|
• Ambient temperature sensor
• PCM
|
|
P_BRAKE_SW
|
Off/On
|
• Off: Parking brake switch is off. (Parking brake lever is not pulled.)
• On: Parking brake switch is on. (Parking brake lever is pulled.)
|
—
|
• Parking brake switch
• Instrument cluster
|
|
PNC_CS
|
Off/On
|
• Off: Panic control signal is not received.
• On: Panic control signal is received.
|
—
|
• Front body control module (FBCM)
• Rear body control module (RBCM)
|
|
PNC_HD_CS_R
|
Off/On
|
|
—
|
—
|
|
PNC_HN_CS_R
|
Off/On
|
|
—
|
—
|
|
PTC_HEAT_CS
|
Off/On
|
• Off: PTC heater control signal is not received.
• On: PTC heater control signal is received.
|
—
|
PTC heater
|
|
R_FOG_LMP*8
|
Off/On
|
• Off: Rear fog light is turned off.
• On: Rear fog light is turned on.
|
—
|
• Rear fog light
• Instrument cluster
• Front body control module (FBCM)
• Rear body control module (RBCM)
|
|
R_FOG_SW*8
|
Off/On
|
• Off: Rear fog light switch is not in R.FOG position
• On: Rear fog light switch is in R.FOG position
|
—
|
• Rear fog light switch
• Start stop unit
|
|
RES_CS
|
Off/On
|
|
—
|
—
|
|
RLS_FLT*5
|
O.K./FAULT
|
• OK: Rain sensor is normal.
• FAULT: Rain sensor has a malfunction.
|
—
|
Rain sensor
|
|
S_HT_CUT*9
|
No_Request/Cut
|
• No_Request: Except below
• Cut: When FBCM stops or lowers seat warmer output
|
—
|
Front body control module (FBCM)
|
|
SHIFT_L_POS*10
|
Between/P/R/N/D/S(2)/L(1)
|
• Between: Selector lever is between two positions.
• P: Selector lever is in P position.
• R: Selector lever is in R position.
• N: Selector lever is in N position.
• D: Selector lever is in D position.
• S(2): Selector lever is in D position 2nd gear.
• L(1): Selector lever is in D position 1st gear.
|
—
|
TCM
|
|
TURN_L_L
|
Off/On
|
• Off: Turn light (LH) is turned off.
• On: Turn light (LH) is turned on.
|
—
|
• Front turn light
• Side turn light
• Rear turn light
|
|
TURN_L_R
|
Off/On
|
• Off: Turn light (RH) is turned off.
• On: Turn light (RH) is turned on.
|
—
|
• Front turn light
• Side turn light
• Rear turn light
|
|
TURN_SW
|
Off/Turn_R_On/Turn_L_On/Unknown
|
• Off: Turn switch is in OFF position.
• Turn_R_On: Turn switch is in RH position.
• Turn_L_On: Turn switch is in LH position.
• Unknown: Turn switch position is not determined.
|
—
|
• Turn Switch
• Start stop unit
|
|
VPWR_B
|
V
|
Displays front body control module (FBCM) power supply voltage.
|
—
|
Front body control module (FBCM)
|
|
VSPD
|
KPH, MPH
|
Displays vehicle speed.
|
—
|
PCM
|
|
WAS_FLUID_L*11
|
Normal/Low/Unknown
|
• Normal: Washer fluid level is normal.
• Low: Washer fluid level is low.
• Unknown: Washer fluid level is not determined.
|
—
|
Washer fluid-level sensor
|
|
WAS_MT_RY_F
|
Off/On
|
• Off: Windshield washer motor relay is off.
• On: Windshield washer motor relay is on.
|
—
|
Front body control module (FBCM)
|
|
WAS_MT_RY_R*12
|
Off/On
|
• Off: Rear washer motor relay is off.
• On: Rear washer motor relay is on.
|
—
|
Front body control module (FBCM)
|
|
WASHER_F
|
Off/On
|
• Off: Windshield washer switch is off.
• On: Windshield washer switch is on.
|
—
|
• Windshield washer switch
• Start stop unit
|
|
WASHER_R*12
|
Off/On
|
• Off: Rear wiper and washer switch is not in rear washer position.
• On: Rear wiper and washer switch is in rear washer position.
|
—
|
• Rear wiper and washer switch
• Start stop unit
|
|
WIP_CS_RLS*5
|
Off/Single_Wipe/F_Wiper_LOW/F_Wiper_HI/Failure
|
• Off: Wiper operation signal is not received from rain sensor.
• Single_Wipe: Signal to operate wiper once is received from rain sensor.
• F_Wiper_LOW: Signal to operate wiper at low speed is received from rain sensor.
• F_Wiper_HI: Signal to operate wiper at high speed is received from rain sensor.
• Failure: Communication with rain sensor is failed.
|
—
|
Rain sensor
|
|
WIP_F
|
OFF/LOW/HI/INT / AUTO
|
• OFF: Windshield wiper switch is in OFF position.
• LOW: Windshield wiper switch is in LO position.
• HI: Windshield wiper switch is in HI position.
• INT / AUTO: Windshield wiper switch is in INT or AUTO position.
|
—
|
• Windshield wiper switch
• Start stop unit
|
|
WIP_F_INT_L
|
%
|
Displays windshield wiper INT level signal value received.
|
—
|
• Windshield wiper switch
• Start stop unit
|
|
WIP_F_LOW
|
Off/On
|
• Off: Windshield wiper switch is not in LO position.
• On: Windshield wiper switch is in LO position.
|
—
|
• Windshield wiper switch
• Start stop unit
|
|
WIP_F_MST
|
Stop/Move
|
• Stop: Autostop switch is on.
• Move: Autostop switch is off.
|
—
|
Windshield wiper motor
|
|
WIP_F_RY_HI
|
Off/On
|
• Off: Windshield wiper HI relay is off.
• On: Windshield wiper HI relay is on.
|
—
|
Front body control module (FBCM)
|
|
WIP_F_RY_LO
|
Off/On
|
• Off: Windshield wiper LO relay is off.
• On: Windshield wiper LO relay is on.
|
—
|
Front body control module (FBCM)
|
|
WIP_R*12
|
OFF/LOW/INT
|
• OFF: Rear wiper switch is in OFF position.
• LOW: Rear wiper switch is in ON position.
• INT: Rear wiper switch is in INT position.
|
—
|
• Rear wiper switch
• Start stop unit
|
|
WIP_R_RY*12
|
Off/On
|
• Off: Rear wiper motor is not operated.
• On: Rear wiper motor is operated.
|
—
|
• Rear wiper motor
• Instrument cluster
• Rear body control module (RBCM)
|