LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
id091800112900
Auto Light System
• There are two methods for personalizing the auto light system: One using the M-MDS and the other using the center display (with center display). Refer to the following and perform the setting.
Using M-MDS
-
Using center display
-
Turn Light System
• There are two methods for personalizing the turn light system: One using the M-MDS and the other using the center display (with center display). Refer to the following and perform the setting.
Using M-MDS
-
Using center display
-
Coming Home Light System
• There are two methods for personalizing the coming home light system: One using the M-MDS and the other using the center display (with center display). Refer to the following and perform the setting.
Using M-MDS
-
Using center display
-
Leaving Home Light System
• There are two methods for personalizing the leaving home light system: One using the M-MDS and the other using the center display (with center display). Refer to the following and perform the setting.
Using M-MDS
-
Using center display
-
Room Light Control System
• There are two methods for personalizing the room light control system: One using the M-MDS and the other using the center display (with center display). Refer to the following and perform the setting.
Using M-MDS
-
Using center display
-
Running Light System (Australian Specs.)
|
Function
|
Initial setting
|
Setting contents
|
Control module
|
|
The running light system function can be set.
|
On (Running light illumination)
|
Off (Running light non-illumination)/On (Running light illumination)
|
Front body control module (FBCM)
|
• There are two methods for personalizing the running light system: One using the center display (with center display) and the other using the light switch. Refer to the following and perform the setting.
Using center display
-
Using light switch
-
― Perform the following procedure to change the running light illumination/non-illumination setting.
-
Note
-
• Because each procedure needs to be completed within a predetermined period of time, refer to the following procedure before performing the set up work, and then verify the content of the work and the time limit.
• Depending on the vehicle specification, the running lights on some vehicles cannot be turned off.
