DRIVE BELT REMOVAL/INSTALLATION [MZR-CD (RF Turbo)]

id0110f1801600

1.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

2.  Set the front mudguard (RH) out of the way. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

3.  Remove the splash shield (RH).

4.  Turn the center of the tensioner pulley clockwise to release tension to the drive belt.

am3zzw00003939

5.  Remove the drive belt.

6.  Install the drive belt or install a new drive belt.

7.  Verify that the drive belt auto tensioner indicator mark does not exceed the limit. (See DRIVE BELT INSPECTION [MZR-CD (RF Turbo)].)

•  If it exceeds the limit, replace the drive belt.

8.  Install the splash shield (RH).

9.  Connect the front mudguard (RH). (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

10.  Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)