FAN MOTOR INSPECTION [MZR-CD (RF Turbo)]

id0112f1800900

Part Inspection

1. Verify that the battery is fully charged. (See BATTERY INSPECTION [MZR-CD (RF Turbo)].)

2. Disconnect the cooling fan motor connector (2 terminals).

3. Install a tester and battery to the cooling fan motor connector (2 terminals) as shown in the figure.

am6zzw00002329

4. Verify that each fan motors operate smoothly at the standard current.

• If there is any malfunction, replace the applicable part.

Cooling fan motor No.1, No.2 standard current

No.1: 3.7—6.7 A [12 V]

No.2: 6.1—9.1 A [12 V]