GLOW PLUG INSPECTION [MZR-CD (RF Turbo)]

id0113f1804300

Note
•  Perform the following test only when directed.

1.  Remove the glow plug cord. (See GLOW PLUG REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)

2.  Measure the resistance between the glow plug terminal and the cylinder head (body ground) using an ohmmeter.

•  If not as specified, replace the glow plug. (See GLOW PLUG REMOVAL/INSTALLATION [MZR-CD (RF Turbo)]
Resistance (Reference value)
Approx. 1.0 ohm [20°C {68°F}]
am6zzw00003151

3.  Install the glow plug cord.