CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [L8, LF, L5]

id014046801600

Continuity Inspection

1.  Verify that the CPP switch is installed properly.

2.  Disconnect the negative battery cable.

3.  Remove the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [L8, LF, L5, MZR-CD (RF Turbo)].)

4.  Inspect for continuity between the CPP switch terminals using an ohmmeter.

am6zzw00000807

•  If not as specified, replace the CPP switch.

(See CLUTCH PEDAL REMOVAL/INSTALLATION [L8, LF, L5, MZR-CD (RF Turbo)].)