PCM REPROGRAMMING [L8, LF, L5]

id014046803900

L5

Caution

•  If the crankshaft and the cylinder block are replaced with a type B from a type A as shown in the figure, perform PCM reprogramming. Otherwise, the engine could be damaged.

Crankshaft

am6zzw00004839

Cylinder block

am6zzw00004842

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PCM REPROGRAMMING.

1.  Connect the M-MDS to DLC-2.

am6zzw00004836

2.  After the vehicle is identified, select the following items from the M-MDS initialization screen.

1.  Select the “Module Programming”.

3.  Then, select “Module Reprogramming” and “PCM” from the screen menu.

4.  Perform the PCM reprogramming following the instructions on the screen.