CLUTCH SWITCH INSPECTION [MZR-CD (RF Turbo)]

id0140f1445400

Note

•  Perform the following test only when directed.

Continuity Inspection

1.  Disconnect the negative battery cable.

2.  Remove the clutch switch (See CLUTCH PEDAL REMOVAL/INSTALLATION [L8, LF, L5, MZR-CD (RF Turbo)].)

3.  Inspect continuity between the clutch switch terminals using an ohmmeter.

•  If not as specified, replace the clutch switch.

Specification

am6zzw00003566

am3zzw00004204