FUEL TEMPERATURE SENSOR INSPECTION [MZR-CD (RF Turbo)]

id0140f1806400

Note
•  Perform the following test only when directed.

Resistance Inspection

1.  Disconnect the negative battery cable.

2.  Remove the supply pump. (See SUPPLY PUMP REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)

3.  Measure the resistance between the fuel temperature sensor terminals using an ohmmeter.

•  If not as specified, repair the supply pump. (See SUPPLY PUMP REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)

Specification

Ambient temperature

(°C {°F})

Resistance (kilohm)
20 {68}
2.21—2.69*1
2.32—2.59*2

*1  :First digit below name plate mark * is 1.
*2  :First digit below name plate mark * is 2.
am3zzw00004101
am6zzw00003840