PCM CONFIGURATION [MZR-CD 2.2]

id0140f2802600

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PCM CONFIGURATION.

1.  Connect the M-MDS to DLC-2.

am6zzw00000122

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select the “Module Programming”.

3.  Then, select items from the screen menu in the following order.

1.  Select "Programmable Module Installation".

2.  Select "PCM".

4.  Perform the configuration according to the directions on the screen.

Note

•  If the PCM is replaced with a new one, the PCM stores DTCs P0602 and P1675, illuminates the MIL even though no malfunction is detected. When the configuration is completed, DTCs P0602 and P1675 are cleared.

5.  Retrieve DTC’s using the M-MDS, then verify if DTCs are present.

•  If a DTC is present, perform the applicable DTC inspection.