SUSPENSION SPECIFICATIONS [Australian Specs. and General (L.H.D., R.H.D.) Specs.]

id020000100318


Suspension

LF (MTX)

Item

Specification

4SD

5HB

WGN
Front suspension
Type
Double wishbone
Spring type
Coil spring
Shock absorber type
Low-pressure gas charged, cylindrical, double-acting
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
23 {0.91}
Wheel alignment (Unloaded*1)
Total toe-in
Tire [Tolerance ±4 {0.16}]
(mm {in})
Tire: 2 {0.08}
Rim inner: 1±3 {0.04±0.12}
Degree
0°09′±18′
Maximum steering angle
[Tolerance ±3°]
Inner
Equipped with 16-inch or 17-inch tire: 39°30′
Equipped with 18-inch tire: 37°24′
Outer
Equipped with 16-inch or 17-inch tire: 32°24′
Equipped with 18-inch tire: 31°12′
Caster angle*2 (Reference)
[Tolerance ±1°]
3°37′
3°40′
3°28′
Camber angle*2 (Reference)
[Tolerance ±1°]
-0°16′
-0°13′
Steering axis inclination (Reference)
6°37′
6°34′
Rear suspension
Type
E-type multi-link
Spring type
Coil spring
Shock absorber type
Low-pressure gas charged, cylindrical, double-acting
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
21 {0.83}
Wheel alignment (Unloaded*1)
Total toe-in
Tire [Tolerance ±4 {0.16}]
(mm {in})
Tire: 2 {0.08}
Rim inner: 1±3 {0.04±0.12}
Degree
0°10′±20′
Camber angle*2
[Tolerance ±1°]
-1°10′
-1°13′
-0°59′
Thrust angle [Tolerance ±48′]
0°

*1  :Unloaded: Fuel tank is full. Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right not exceed 1°30′.

LF (ATX) and L5

Item

Specification

4SD

5HB

WGN
Front suspension
Type
Double wishbone
Spring type
Coil spring
Shock absorber type
Low-pressure gas charged, cylindrical, double-acting
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
23 {0.91}
Wheel alignment (Unloaded*1)
Total toe-in
Tire [Tolerance ±4 {0.16}]
(mm {in})
Tire: 2 {0.08}
Rim inner: 1±3 {0.04±0.12}
Degree
0°09′±18′
Maximum steering angle
[Tolerance ±3°]
Inner
Equipped with 16-inch or 17-inch tire: 39°30′
Equipped with 18-inch tire: 37°24′
Outer
Equipped with 16-inch or 17-inch tire: 32°24′
Equipped with 18-inch tire: 31°12′
Caster angle*2 (Reference)
[Tolerance ±1°]
3°37′
3°39′
3°27′
Camber angle*2 (Reference)
[Tolerance ±1°]
-0°17′
-0°14′
Steering axis inclination (Reference)
6°37′
6°34′
Rear suspension
Type
E-type multi-link
Spring type
Coil spring
Shock absorber type
Low-pressure gas charged, cylindrical, double-acting
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
21 {0.83}
Wheel alignment (Unloaded*1)
Total toe-in
Tire [Tolerance ±4 {0.16}]
(mm {in})
Tire: 2 {0.08}
Rim inner: 1±3 {0.04±0.12}
Degree
0°10′±20′
Camber angle*2
[Tolerance ±1°]
-1°10′
-1°13′
-0°59′
Thrust angle [Tolerance ±48′]
0°

*1  :Unloaded: Fuel tank is full. Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right not exceed 1°30′.

MZR-CD 2.2

Item

Specification

5HB

WGN
Front suspension
Type
Double wishbone
Spring type
Coil spring
Shock absorber type
Low-pressure gas charged, cylindrical, double-acting
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
23 {0.91}
Wheel alignment (Unloaded*1)
Total toe-in
Tire [Tolerance ±4 {0.16}]
(mm {in})
Tire: 2 {0.08}
Rim inner: 1±3 {0.04±0.12}
Degree
0°09′±18′
Maximum steering angle
[Tolerance ±3°]
Inner
Equipped with 16-inch or 17-inch tire: 39°30′
Equipped with 18-inch tire: 37°24′
Outer
Equipped with 16-inch or 17-inch tire: 32°24′
Equipped with 18-inch tire: 31°12′
Caster angle*2 (Reference)
[Tolerance ±1°]
3°38′
3°25′
Camber angle*2 (Reference)
[Tolerance ±1°]
-0°19′
-0°16′
Steering axis inclination (Reference)
6°39′
6°37′
Rear suspension
Type
E-type multi-link
Spring type
Coil spring
Shock absorber type
Low-pressure gas charged, cylindrical, double-acting
Stabilizer
Type
Torsion bar
Diameter
(mm {in})
21 {0.83}
Wheel alignment (Unloaded*1)
Total toe-in
Tire [Tolerance ±4 {0.16}]
(mm {in})
Tire: 2 {0.08}
Rim inner: 1±3 {0.04±0.12}
Degree
0°10′±20′
Camber angle*2
[Tolerance ±1°]
-1°13′
-0°59′
Thrust angle [Tolerance ±48′]
0°

*1  :Unloaded: Fuel tank is full. Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right not exceed 1°30′.

Wheel and Tire

Standard tire

Item

Specification
Tire
Size
205/60R16 92V
205/60R16 92V
215/50R17 91W
225/45R18 91W
Wheel
Size
16 × 6J
16 × 6 1/2J
17 ×7J
18 ×7 1/2J
Material
Steel
Aluminum alloy
Offset
(mm {in})
50 {2.0}
55 {2.17}
60 {2.4}
Pitch circle diameter
(mm {in})
114.3 {4.50}

Temporary spare tire*1

Item

Specification
Tire
Size
T125/70D16 96M
Wheel
Size
16 × 4T
Material
Steel
Offset
(mm {in})
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}

*1  :Without Australian specs.