NO.6 DSC INDICATOR LIGHT FLASHES (WHEN NEITHER THE TCS NOR THE DSC ARE OPERATING) [DYNAMIC STABILITY CONTROL (DSC)]
id0403b2880300
|
6 |
DSC indicator light flashes (when neither the TCS nor the DSC are operating) |
|---|---|
|
[TROUBLESHOOTING HINTS]
• Non-completion of module configuration
(If the module configuration is not carried out after replacing the DSC HU/CM, a DSC indicator light will flash. In this case, the DSC is not detected.)
|
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT CONNECTION OF DSC HU/CM, COMBINED SENSOR AND STEERING ANGEL SENSOR CONNECTORS
• Are DSC HU/CM and steering angle sensor connectors connected securely?
|
Yes
|
Perform initialization procedure.
|
|
No
|
Perform initialization procedure after connect the suspected connector securely.
|
||