CLUTCH COVER INSPECTION

id051000800800

1. Measure the wear of the diaphragm spring fingers.

am6uuw00001266

• If not as specified, replace the clutch cover.

Clutch cover diaphragm spring fingers maximum depth

0.6 mm {0.024 in} max.

2. Measure the flatness of the pressure plate with a straight edge and a feeler gauge.

acxaaw00000733

• If not as specified, replace the clutch cover.

Maximum clearance of flatness of the pressure plate

0.3 mm {0.012 in} max.

3. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.

4. Rotate the flywheel and check for misaligned diaphragm spring fingers.

am6uuw00001267

• If not as specified, replace the clutch cover.

Clutch cover diaphragm spring fingers maximum misalignment

1.0 mm {0.04 in} max.