TRANSAXLE OIL REPLACEMENT [G35M-R]

id051501800100

Caution
•  There are two types of transaxle oil for this type of transaxle corresponding to the vehicle identification number. If the engine oil is replaced or supplemented, add oil which corresponds to the vehicle identification number and do not use oil of a different type. If a different type of oil is added, it could result in a transaxle malfunction.

1.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

2.  Remove the drain plug with the washer.

am6zzw00000524

3.  Drain the oil into a suitable container.

4.  Install a new washer and the drain plug.

Tightening torque
39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}

5.  Remove the oil level plug with washer and add the specified amount and type of oil through the oil level plug hole until the level reaches the bottom of the oil level plug hole.

Item

Type A*1

Type B*2
Manual transaxle oil grade
API service GL-4 or GL-5
API service GL-4
Manual transaxle oil viscosity
All-season: SAE 75W-90
Above 10 °C {50 °F}: SAE 80W-90
SAE 75W-80
Manual transaxle oil capacity (approx. quantity)
2.77 L {2.93 US qt, 2.44 lmp qt}

*1: Applied VIN (assumed)

*2: Applied VIN (assumed)
JMZ GH1282*# 100001—JMZ GH1282*# 236790
JMZ GH1282*# 236791—
JMZ GH1482*# 100001—JMZ GH1482*# 236742
JMZ GH1482*# 236743—
JMZ GH19820# 100001—JMZ GH19820# 236671
JMZ GH19820# 236672—
JMZ GH12820# 100001—JMZ GH12820# 234144
JMZ GH12820# 234145—
JMZ GH14820# 100001—JMZ GH14820# 234105
JMZ GH14820# 234106—
JMZ GH19820# 100001—JMZ GH19820# 145131
JMZ GH19820# 145132—

6.  Install a new washer and the oil level plug.

Tightening torque
39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}

7.  Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)