TRANSAXLE OIL INSPECTION [G66M-R]

id0515k1800000

Caution
•  There are two types of transaxle oil for this type of transaxle corresponding to the vehicle identification number. If the engine oil is replaced or supplemented, add oil which corresponds to the vehicle identification number and do not use oil of a different type. If a different type of oil is added, it could result in a transaxle malfunction.

1.  Park the vehicle on level ground.

2.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

3.  Remove the oil level plug and washer.

4.  Verify that the oil is near the brim of the plug port.

am6zzw00000542

•  If the oil level is lower than the low level, add the specified amount and type of oil through the oil level plug hole.

Item

Type A*1

Type B*2
Manual transaxle oil grade
API service GL-4 or GL-5
API service GL-4
Manual transaxle oil viscosity
All-season: SAE 75W-90
Above 10 °C {50 °F}: SAE 80W-90
SAE 75W-80

*1: Applied VIN (assumed)

*2: Applied VIN (assumed)
JMZ GH12F6*# 100001—JMZ GH12F6*# 236702
JMZ GH12F6*# 236703—
JMZ GH12L6*# 100001—JMZ GH12L6*# 236818
JMZ GH12L6*# 236819—
JMZ GH14F6*# 100001—JMZ GH14F6*# 236664
JMZ GH14F6*# 236665—
JMZ GH14L6*# 100001—JMZ GH14L6*# 236873
JMZ GH14L6*# 236874—
JMZ GH19F60# 100001—JMZ GH19F60# 236669
JMZ GH19F60# 236670—
JMZ GH19L60# 100001—JMZ GH19L60# 236749
JMZ GH19L60# 236750—
JMZ GH12F60# 100001—JMZ GH12F60# 223302
JMZ GH12F60# 223303—
JMZ GH12L60# 100001—JMZ GH12L60# 220519
JMZ GH12L60# 220520—
JMZ GH14F60# 100001—JMZ GH14F60# 236796
JMZ GH14F60# 236797—
JMZ GH14L60# 100001—JMZ GH14L60# 226393
JMZ GH14L60# 226394—
JMZ GH19F60# 100001—JMZ GH19F60# 231733
JMZ GH19F60# 231734—
JMZ GH19L60# 100001—JMZ GH19L60# 236153
JMZ GH19L60# 236154—
JM0 GH105100 100001—JM0 GH105100 125678
JM0 GH105100 125679—
JM0 GH10F100 100001—JM0 GH10F100 125693
JM0 GH10F100 125694—
JM7 GH325**# 100001—JM7 GH325**# 125756
JM7 GH325**# 125757—
JM7 GH32F**# 100001—JM7 GH32F**# 125679
JM7 GH32F**# 125680—
JM7 GH34F**# 100001—JM7 GH34F**# 125323
JM7 GH34F**# 125324—
JM7 GH39F**# 100001—JM7 GH39F**# 125722
JM7 GH39F**# 125723—
JM7 GH425**# 100001—JM7 GH425**# 125677
JM7 GH425**# 125678—
JM7 GH42F**# 100001—JM7 GH42F**# 125686
JM7 GH42F**# 125687—
JM7 GH445**# 100001—JM7 GH445**# 125687
JM7 GH445**# 125688—
JM7 GH44F**# 100001—JM7 GH44F**# 125593
JM7 GH44F**# 125594—
JM7 GH49F**# 100001—JM7 GH49F**# 123266
JM7 GH49F**# 123267—
JM6 GH1051*0 100001—JM6 GH1051*0 125600
JM6 GH1051*0 125601—
JM6 GH10F1*0 100001—JM6 GH10F1*1 125681
JM6 GH10F1*0 125682—

5.  Install a new washer and the oil level plug.

Tightening torque
39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}

6.  Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)