OIL PRESSURE SWITCH REMOVAL/INSTALLATION [FS5A-EL]

id051721806000

Warning

•  When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait until they are cool before replacing ATF.

1.  Remove the oil pressure switch.

(1)  Disconnect the negative battery cable.

(2)  Remove the aerodynamic under cover NO.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

(3)  Disconnect the cord assembly connector.

am6zzw00001499

(4)  Remove the oil pressure switch.

(5)  Remove the packing from the oil pressure switch.

2.  Install the oil pressure switch.

(1)  Install a new packing and oil pressure switch.

Tightening torque

17.1—22.1N·m {1.75—2.25 kgf·m, 13—16 ft·lbf}

(2)  Connect the cord assembly connector.

(3)  Install the aerodynamic under cover NO.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

(4)  Connect the negative battery cable.