AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION


id051800274500


Selector Lever Removal/Installation

1.  Disconnect the selector lever component connector.

(1)  Disconnect the negative battery cable.
(2)  Remove the rear console. (SeeREAR CONSOLE REMOVAL/INSTALLATION.)
(3)  Disconnect the selector lever component connector.
am6zzw00002881

2.  Remove the selector lever component.

(1)  Disconnect the selector cable from the selector lever.
am6zzw00002567
(2)  Remove the selector lever component.
am6zzw00002568

3.  Install in the reverse order of removal.


Selector Cable Removal/Installation

1.  Disconnect the negative battery cable.

2.  Remove the aerodynamic under cover NO.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

3.  Remove the rear console. (SeeREAR CONSOLE REMOVAL/INSTALLATION.)

4.  Remove the dashboard. (SeeDASHBOARD REMOVAL/INSTALLATION.)

5.  Remove the A/C unit. (SeeA/C UNIT REMOVAL/INSTALLATION.)

6.  Remove the SAS control module. (SeeSAS CONTROL MODULE REMOVAL/INSTALLATION.)

7.  Remove in the order indicated in the table.

8.  Install in the reverse order of removal.

9.  Adjust the selector cable after having installed. (SeeSELECTOR CABLE ADJUSTMENT.)

am6zzw00002800

1
Selector cable (transaxle side)
2
Bolt
3
Selector cable (selector lever side)