MAGNETIC CLUTCH ADJUSTMENT [MANUAL AIR CONDITIONER]

id0740a2800500

LF, L8, L5

1. Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

am6zzw00001102

2. Verify that the clearance.

am6zzw00001103

• If not within the specification, remove the pressure plate and adjust the clearance by changing the shim or the number of shims.

Magnetic clutch clearance

0.3—0.6 mm {0.012—0.023 in}

MZR-CD (RF-Turbo), MZR-CD 2.2

1. Set the A/C compressor on a level block.

am5ezw00001256

2. Turn on the magnetic clutch by connecting the battery positive voltage to the magnetic clutch connector and ground to the A/C compressor body.

3. Fix a dial gauge on a magnetic base and sent the measuring probe onto point A on the pressure plate surface.

am6zzw00003547

4. Turn off the magnetic clutch by disconnecting the ground from the A/C compressor body, then measure the dial gauge readings.

5. Measure the clearance for points B and C on the pressure plate surface by repeating the above Step 2 through 4.

6. Verify that the clearance.

• If not within the specification, remove the pressure plate and adjust the clearance by changing the shim (0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.

am5ezw00001255

Magnetic clutch clearance

0.3—0.5 mm {0.012—0.019 in}